Jump to content
SAU Community

Recommended Posts

Hey,

I'm currently parting out a R34 Skyline Sedan.

Here's some of the parts currently up for grabs. Please DO NOT ask me to ship any large parts as it'll cost an arm and leg to ship from NZ - AU. :blush:

PM me if your after any other parts

NOTE: All prices are in AU dollars

A) Airbag system (complete) Tiptronic steering wheel / Passenger airbag / Airbag computer $500

B) Air con unit (damaged face plate but still working fine) $60

C) A pillar trim + boost gauge (not branded) $80

D) Centre dash vent $80

E) Centre console (with leather lid / compartment) $120

F) Complete set (5x) seat belts inc. bolts and buckles $200

G) Door sill trims $80

H) Speedo cluster surround $60

I) Tiptronic shifter surround + ash tray $80

J) Tiptronic cluster, approx 110,000 km's $150

K) Left / Right Non-Xenon headlights (left headlight has some small lines) $1000

L) Left / Right wing mirrors $160

M) Monsoon / whether shields / wind deflectors (left rear is cracked but glued back) $100

N) Rear wiper + motor + loom $100

O) Tail lights (tinted lenses) $160

P) JBL Speakers + Tweeters (6.5" / 2-way / 75W RMS / 225W peak) $160

Q) Glove box $80

A) airbags.th.jpg B) airconunit.th.jpg C) apillartrimboostgauge.th.jpg D) airconvent.th.jpg

E) centreconsole.th.jpg F) seatbelts.th.jpg G) doorsillcovers.th.jpg H) clustersurround.th.jpg

I) tiptronicshiftersurroun.th.jpg J) cluster.th.jpg K) 48396374.th.jpg p1000506.th.jpg

L) 83223873.th.jpg M) winddeflectors.th.jpg N) rearwiper.th.jpg O) 70568454.th.jpg

P) jblsoundsystem.th.jpg Q) 42715815.th.jpg

Edited by Chang

Alright here's what has been sold thus far:

- R34 Headlights SOLD

- R34 Left window switch SOLD

- RB25de Neo ECU SOLD

- All exterior badges SOLD

Everything is still up for grabs :P

Edited by Chang

Hi mate, can I just take the arm-rest and handbrake leather cover separately? Do they fit on 2 doors GTT? If u do post, plz PM me the price including post to SA 5072. Need them asap! Cheers! :(

hay buddy

how much for just the ash tray (no surround just the ash tray)

and the a/c control plastic cover (just the cover please mine cracked when i took it apart for paint dont need the buttons and actual unit from behind it)

sent to 3032 melbourne

cheers

julz

Rear wiper + motor + loom SOLD

Tail lights (tinted lenses) Payment Pending

Still heaps of parts available. Just ask :down:

Edited by Chang

A) Airbag system (complete) Tiptronic steering wheel / Passenger airbag / Airbag computer $500

C) A pillar trim + boost gauge (not branded) $80

D) Centre dash vent $80

E) Centre console (with leather lid / compartment) $120

F) Complete set (5x) seat belts inc. bolts and buckles $200

H) Speedo cluster surround $60

I) Tiptronic shifter surround + ash tray $80

J) Tiptronic cluster, approx 110,000 km's $150

M) Monsoon / whether shields / wind deflectors (left rear is cracked but glued back) $100

O) Tail lights (tinted lenses) $160

Q) Glove box $80

B) Air con unit (damaged face plate but still working fine) $60

G) Door sill trims $80

K) Left / Right Non-Xenon headlights (left headlight has some small lines) $1000

L) Left / Right wing mirrors $160

N) Rear wiper + motor + loom $100

P) JBL Speakers + Tweeters (6.5" / 2-way / 75W RMS / 225W peak) $160

Stereo surround + brackets

RB25de Neo ECU

All exterior badges

Car will be sold this weekend. So any other parts that are not listed here, it'll be your last chance to ask. :merli:

Edited by Chang
  • 3 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The team at OBD2 Australia are pretty good, shoot them an email and ask them. I've dealt with them before for work stuff. I'd be shocked if it didn't work, so long as Consult can activate the ABS. But you might need to use KLine for it which would be the stopper, as I don't think that piece does KLine comms.
    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
×
×
  • Create New...