Jump to content
SAU Community

Recommended Posts

  • Replies 108
  • Created
  • Last Reply

Top Posters In This Topic

little update

turbo will be backon wednesday

im thinking of getting a blowjob vavle along with the new turbo

wats the though on that?

Stock BOV will be fine... unless you want that ghey "PSSSHHHHHTTTT" when you lift off.

nice blitz filter, looks exactly like mine lol

whats interesting about it?? i ask because i cant have volume on my machine, people will hear

I think Danny is pointing to the "tu tu tu tu".

Different to "psssshhhhhtttt", but still ghey...

... Why would you want your M35 to sound like a crappy VN Crappydore?

go watch some of the edward lees videos. the old man (edward) has no idea about cars, it makes me wonder how he sold cars! he was driving mine (thats where it came from) and i was explaining things to him! according to him (and he says it on the video) they have a VQ35 motor, and dual zone climate control! wow i had no idea hahah not to mention tv and sat nav!

nope, its air bouncing back from the throttle and going back out the turbo. its essentially air changing direction!

the other flutter you hear on WRC cars are a pop off valve (i think) not to be confused with a blow off valve. i think they go after the throttle body not before it like a BOV does

so how do i get that damn fluttering sound

there is a VERY cheap way to do this.

find the BOV return pipe where it goes back into the intake. remove pipe. insert a coke bottle lid (i found pepsi and fanta were better for performance) and put a clamp over it so it doesnt move. replace pipe. flutter will now occur.

if a coke bottle lid isnt big enough, just put something in there that wont leak or move. but remember to clamp it! you dont want it being sucked into the engine.

An even cheaper way (have you seen the price of coke?) would be to disconnect the vacuum line from the BOV itself. Buy I do not really recommend it - The factory didn't put them in for the sake of it, the pressure reversion isn't healthy for the turbos wellbeing.

that wont work. the spring tension itself without the vacuum line behind it isnt enough to keep it shut all the time. it will open with the boost pressure and also with the sudden pressure increase when the throttle closes

:ninja: You really want to waste money on pssssshhhh or tu tu tu tu!!!!....couple more dollars and you can go paddle shift.

....or even different headlights aye Cam :)!!!

So what do you want? Paddles or a manual??

nyaanyaa all you want bud. Once the front is done, all I will feel is satisfaction when I look at my car... I also take solice in the fact that when you look at your car, all you see is a stoned Pokemon. :ninja:

Edited by iamhe77
that wont work. the spring tension itself without the vacuum line behind it isnt enough to keep it shut all the time. it will open with the boost pressure and also with the sudden pressure increase when the throttle closes

Fair call - I didn't know if the spring would hold it closed or not.

But the point about keeping one in use remains!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...