Jump to content
SAU Community

Recommended Posts

Got this:

-Boss 6x9s (includes speaker wire)

-Boss 6.5" (includes speaker wire)

-Boss 4Ch Amp

-Boss 10" Sub

-New sub box

-Amp cables

Whats required:

-Spacers to fit and connect 6x9s (Cheers 2LV8ETR)

-Wire up amp into boot (brackets if necessary)

-Cut sub box and fit sub

-Wire up Sub in boot

-Leave me some space so I can mount another amp to power sub :down: (Unless I get one beforehand)

-Fitting and connecting a new headunit

Whats provided:

-Amp wiring kit

-Speaker wires still in packet

Pictures.jpg

I think I trust myself to wire in the 6.5s into the doors.

Please don't recommend me to go to Alberts or something cause last time I went to a recommended audio installer, I got ripped off badly. Cheers.

Edited by Ten Four
Link to comment
https://www.sau.com.au/forums/topic/279607-audio-install-cashiebeers/
Share on other sites

Cut parcel shelf to fit and connect 6x9s

I used to install stereo systems for a living man and I can tell you that if you cut into the parcel shelf, you will be begging for a yellow sticker.

Most cops know this and will hit you if they see it.

The reason for this is that you're compromising the integrity of the chassis. If they label you, you'll need to return the shelf to stock to comply with ADR's.

Use spacers or 6" speakers instead. If you're using a sub, there's no need for 6x9's.

Ok, didn't realise. Spacers FTW :). I just bought the lot for $200 so just want to install everything. I know like you say theres probably no need for the sub but still want it installed cause I'm a stubborn bugger :down:.

Edited by Ten Four
Sorry lols. Mr 2LV8ETR, would you like to install my junk? :P

You bring your car to me here, lackey and I'll do it with you so you can learn a few things as you go.

If you want me to come to you and do the whole thing it'll cost you the 34 GT-R and the 33 LM V-Spec.

Or, if the Banana King really wants it, I'll step back and concede, I don't mind.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...