Jump to content
SAU Community

Recommended Posts

Hey guys

i want to replace the fuel filter on my Fuel Pump. It looks like a little white sock / filter thing.

Anyone have a part number for this item or know where i can get a replacement one?

I know that nissan say that it is a non serviceable item, however, i want to be able to put a new one in for peace of mind when i install my new fuel pump

Cheers

-Mark

Link to comment
https://www.sau.com.au/forums/topic/279648-replacing-fuel-filter/
Share on other sites

Have you got the new fuel pump yet?

Last time i replaced one was on an evo. The new pump (walbro) actually came with a new one of those white sock filter things...

That is not the fuel filter as such.. there is usually another one somewhere in the car.

hey guys thanks for the suggestions. on my trip today and total waste of time, i have found that for future reference:

1. as zei said, there is no engine fuel filter. only the sock strainer thing. however there is a filter in the tank which the fuel pump itself sits in, its a massive white one. i tried to buy one from repco, both X-Trail and Maxima ones did not match the V35 one. I went to Nissan and they said it only comes complete with a new fuel pump, which from them costs $1100. ouch!

2. the stock fuel pump is very easy to get to. under your rear seat on the drivers side.

3. my car is fine, and i got worried for nothing all because of a stupid dyno readout. :P

4. i saved money on buying a new fuel pump woo~!

5. my car made approx 8-9kw extra with the motordyne plenum spacer and the intake tube over a stock VQ35DE which is about a 12hp increase, which seems about right.

Edited by BLISTC
  • 2 months later...

Just want to know how hard is it to replace the fuel pump back to the spot without stuff things up??...on a CVT sedan ofcoz.

I just had a 80,000k major service at CBD nissan.......its been over 2 week and back to them with petrol leakage under the body.

they said it was the O-ring on the fuel pump as it curved when they place it back on the first time...

second time they said they applied some "glue" to stop the leak - but still leaking....and had to leave the car there for 2 days to get it done

now just found out the car still leaking petrol for the third time....just send the car back to nissan.....plus sniffing petrol emission out from the back seat while driving over 2 weeks ...

is this like a common issue? is really that hard to replace the o-ring/fuel pump back to the original spot?

bro suspecting they might replaced incorrect part on the fuel pump/filter causes the leak.

Edited by Japav

what happens is the o ring will swell up which it probalby has when it has come in contact with the petrol they have spilled onto it.

you will need to replace the whole o ring it only costs a few measly bucks if they are serioulsy GLUING the oring down WTF??? take your car elsewhere

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...