Race__24 Posted July 22, 2009 Share Posted July 22, 2009 Just wondering if anyone has one instatted in any car, but particularly a RS4 Stagea. I've got a few questions 1. How many press/temp sensors can you add? 2. Does it come with any pressure sensors or anything standard? 3. What exactly does it display strait out of the box? 4. I basically want to display, oil press, water temp, boost pressure, knock. Is this possible with this unit, or is there a better option? Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/ Share on other sites More sharing options...
Rekin Posted July 22, 2009 Share Posted July 22, 2009 Just wondering if anyone has one instatted in any car, but particularly a RS4 Stagea.I've got a few questions 1. How many press/temp sensors can you add? 2. Does it come with any pressure sensors or anything standard? 3. What exactly does it display strait out of the box? 4. I basically want to display, oil press, water temp, boost pressure, knock. Is this possible with this unit, or is there a better option? I got a Blitz r-vit TypeII in my r32 skyline. It plugs into the consult port near the fuses. It only shows ECU details. Doesnt have any external sensors, only reads ecu information. (no different to plugging a laptop with consult cable) Displays all sensors which the ecu reads; water temp, afm voltage, o2 voltage, injector duty cycle, ignition timing, battery voltage, speed, rpm In regards to question 4, you are after a single unit which can display external sensors for water temp, oil press, boost press etc. Only option ive found on the internet is Defi Link - http://www.nengun.com/defi/link-display Although after buying all the sensors etc, it will set you back close to $1k Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4729129 Share on other sites More sharing options...
Race__24 Posted July 23, 2009 Author Share Posted July 23, 2009 yeah, was thinking that, might just go with guages, I just thought the single unit would be easier to fit in as all the din's are already taken up. I'll have to search a bit more. Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4730725 Share on other sites More sharing options...
zei20l Posted July 23, 2009 Share Posted July 23, 2009 there is also an HKS camp and camp 2. both great units. require an external display however, and can plug in many sensors etc Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4730752 Share on other sites More sharing options...
Race__24 Posted July 23, 2009 Author Share Posted July 23, 2009 Well I can use the TV screen to display stuff on Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4730802 Share on other sites More sharing options...
_Ryan_ Posted July 23, 2009 Share Posted July 23, 2009 non-touch informeter FTW Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4730827 Share on other sites More sharing options...
Race__24 Posted July 23, 2009 Author Share Posted July 23, 2009 Displays all sensors which the ecu reads;water temp, afm voltage, o2 voltage, injector duty cycle, ignition timing, battery voltage, speed, rpm So does it display knock values? I know the computer sees them but I haven't seen it mentioned anywhere. A Blitz unit looks like the pick of the ones on nengun for me. The Blitz MMD might be a goer with the boost sensor, included. Not sure on the differences between all the different units. The MMD with another pressure sensor would probably do the trick. I'd go ask at my local supplier, but that's AutoBahn, they wouldn't have a clue. Why the hell didn't the stag come with an oil pressure guage anyway!!! It doesn't already have a sensor does it? Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4730842 Share on other sites More sharing options...
ssshonky Posted July 23, 2009 Share Posted July 23, 2009 there was a guy on here called newKleer or something like that he made a 4 chan temp monitor - have a search .. looked pretty good Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4730847 Share on other sites More sharing options...
Rekin Posted July 23, 2009 Share Posted July 23, 2009 So does it display knock values? I know the computer sees them but I haven't seen it mentioned anywhere.A Blitz unit looks like the pick of the ones on nengun for me. The Blitz MMD might be a goer with the boost sensor, included. Not sure on the differences between all the different units. The MMD with another pressure sensor would probably do the trick. I'd go ask at my local supplier, but that's AutoBahn, they wouldn't have a clue. Why the hell didn't the stag come with an oil pressure guage anyway!!! It doesn't already have a sensor does it? only shows ignition timing degree value thats all. Also, the blitz r-vit only works on standard ecu's. If you have a powerFC it wont work. If you're using a standard ecu, they have knock protection anyways and will switch to safe map if anything goes wrong. The blitz r-vit also works with chipped standard ecu's such as nistune (where you can tune the knock map to protect car etc) Else the powerfc, i believe, shows knock reading and flashing light but thats all you get. No safe map switching as standard ecu Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4730891 Share on other sites More sharing options...
NewKleer Posted July 23, 2009 Share Posted July 23, 2009 there was a guy on here called newKleer or something like thathe made a 4 chan temp monitor - have a search .. looked pretty good that was mearcat. i think thread for it is still in group buy forum, probably closed by now. So does it display knock values? I know the computer sees them but I haven't seen it mentioned anywhere. nope, consult doesnt give u knock reading, neither does it have oil temp or oil pressure or boost. Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4731159 Share on other sites More sharing options...
Race__24 Posted July 23, 2009 Author Share Posted July 23, 2009 I've got an Emanage, not sure what sort of knock protection it has. Are there any tricky guage mounting options for a stagea with a factory tv setup? Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4731404 Share on other sites More sharing options...
M I K E Posted July 23, 2009 Share Posted July 23, 2009 I've got an Emanage, not sure what sort of knock protection it has. Are there any tricky guage mounting options for a stagea with a factory tv setup? you can get 3 guage pods that sit ontop of the dash above the centre vent that look pretty nice i've also got some guages here if you're looking for some Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4731557 Share on other sites More sharing options...
pyro-ns Posted July 23, 2009 Share Posted July 23, 2009 the mrs and i are highly interested in gauge mounting position too mate. if yu come up with something that isn't obtrusive, doesn't take away a vent, doesn't block the clock and is still easy enough to see whilst driving, let me know, lol. i'll keep looking and return the favour if you want how many gauges are you looking at having and what size faces? Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4731639 Share on other sites More sharing options...
M I K E Posted July 24, 2009 Share Posted July 24, 2009 you can also get guage plates that mount where the passenger side airbag is, fairly popular in japan but i wouldn't recommend it. you can always mount the guages in the glove box, leave it open when you want to see them and keep it closed when you don't want anyone else too Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4732034 Share on other sites More sharing options...
pyro-ns Posted July 24, 2009 Share Posted July 24, 2009 haha, i could see the passenger airbag thing being pretty disasterous so far we're thinking 1 near the a pillar, 2 in the ash tray (not quite too sure how we're gonna achieve that mean feat, but we'll see how we go) and the 4th one in the glove box... still early days yet though. noone makes cars to hold gauges! Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4732458 Share on other sites More sharing options...
Race__24 Posted July 24, 2009 Author Share Posted July 24, 2009 What guages heve you got MIKE? I was thinking about making up a panel that covers the ash tray and cig lighter to take 3 or 4 52-60mm guages. Then wire a cig lighter plug into the centre consol. I want atleast 2 guages, oil press and boost. If i can fit more in I'll also put in a oil temp and water temp. If i could wire a switch between 3 sensors I'd have the temp guage so it can display water, oil and trans temps. Not sure if it's possible, but I don't see why not Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4733235 Share on other sites More sharing options...
Race__24 Posted July 26, 2009 Author Share Posted July 26, 2009 What guages heve you got MIKE? Mike? Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4735332 Share on other sites More sharing options...
M I K E Posted July 26, 2009 Share Posted July 26, 2009 60mm oil pressure, 52mm oil temp, 52mm water temp and 52mm fuel pressure. all electric and never been used, the fuel pressure is a full sweep guage too (cost me more money to buy lol) Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4735440 Share on other sites More sharing options...
M I K E Posted July 26, 2009 Share Posted July 26, 2009 should also add that the 3x52mm guages are in a single din panel thingo and the 60mm guage is in a greddy a-pillar mount ready to be fitted Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4735442 Share on other sites More sharing options...
Race__24 Posted July 26, 2009 Author Share Posted July 26, 2009 If I was to get something made up, to hold guages in the area below the din panels, over the cig lighter and ash tray, would people be interested in getting one also? What i'm planning is to make up a mould to fit the area perfectly. Then lay in a few layers of carbon fibre, once it's set I'll trim them up. If a few people would like them, or i couldn't get it looking good, I'd get the carbon fibre work done professionally. But by machining up a nice mould it should make things much easier either way. Link to comment https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4735604 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now