Jump to content
SAU Community

Recommended Posts

Black Nissan 180sx 1992 manual turbo and highly modified

REPAIRABLE, OR FOR PARTS

Damaged RHF Drivers side

Engine runs

Thousands spend on the whole car with performance mods see list below

New engine recently put in with receipts

Mechanic owner

Must sell ASAP to pay off debts

Car was recently finished until crash so all parts are near new

BODY

Body kit

Gandor tail Lights

Recent respray

INTERIOR

Boss kit

Quick release kit

Nardi steering wheel

Nismo gear knob

BEE-R Rev limiter

Apexi turbo timer

Apexi AVCR boost controller

7 racetech gauges

Strobe lights

Sony head deck and speakers

Drift handbrake button

ENGINE

Alloy radiator

Splitfire coilpacks

Walbro fuel pump

Front mount intercooler

Blow off valve

EXHAUST

3" Straight through

High flow cat

Heat wrap over exhaust

DRIVETRAIN

Exedy heavy duty clutch

Nismo braided clutch like

Nismo clutch slave cylinder

Shimmed LSD

BRAKES/WHEELS

Five stud conversion kit bolt on with genuine new wheel bearings

MU secret pads HC+

Slotted rotors

Nismo braided brake lines

R32 GTR wheels

Jnc wheel nuts

SUSPENSION

Tein super street coilovers

Whiteline sway bars

Kmac strut top bars

Pinapple cradle bushes

New tie rod and tie rod ends

Steering metal spacer replacement

Please contact me if you have any questions 0423428670 -Chris

http://cgi.ebay.com.au/Repairable-wrecking...id=p3286.c0.m14

Edited by chriz

hey mate

if you do decide to part it out let me know as i'm definatly keen on pretty much all this:

if you interested i am happy to pay cash, just need to shift my wheels and then i can come round, can also swap your suspension for mine with cash your way to keep it rolling.

DRIVETRAIN

Exedy heavy duty clutch

Nismo braided clutch like

Nismo clutch slave cylinder

Shimmed LSD

BRAKES/WHEELS

Five stud conversion kit bolt on with genuine new wheel bearings

MU secret pads HC+

Slotted rotors

Nismo braided brake lines

R32 GTR wheels

Jnc wheel nuts

SUSPENSION

Tein super street coilovers

Whiteline sway bars

Kmac strut top bars

Pinapple cradle bushes

New tie rod and tie rod ends

Steering metal spacer replacement

Boss kit

Quick release kit

Nardi steering wheel

Nismo gear knob

7 racetech gauges

Strobe lights - because they looked cool the other night lol

let me know, i'll be more then happy to come round and give you guys a hand stripping it all down, least i can do

cheers

james (enamal panda sil :happy: )

Shimmed LSD

Five stud conversion kit bolt on with genuine new wheel bearings

Nismo braided brake lines

Tein super street coilovers

Pinapple cradle bushes

New tie rod and tie rod ends

Steering metal spacer replacement

Boss kit

Quick release kit

Nardi steering wheel

Nismo gear knob

7 racetech gauges - not including boost or DET specific gauges.

Strobe lights - because they looked cool the other night lol

possibly interested in the gearbox aswell, mine has just started crunching 3rd on downshifts.

let me know, i'll be more then happy to come round and give you guys a hand stripping it all down, least i can do

will also be able to swap my shocks and springs for the coils to keep the shell rolling, make things a bit easier for you.

cheers

james (enamal panda sil :P )

Edited by direct

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...