Jump to content
SAU Community

Recommended Posts

as far as the rim width goes you will get away with it if you run the same sized tired on front and backs to keep the ATTESA happy

just to clarify, he's get away with the same sized tire in this instance as there is only half an inch difference in rim width but the rule of thumb for attessa is same overall rolling diameter

Link to comment
https://www.sau.com.au/forums/topic/281589-wheel-help/#findComment-4745157
Share on other sites

should be apples, there are stacks of tyre size and rolling diameter calculators on the net that you can use - check to see that the rolling diameter front to rear is the same and you won't have the attessa kicking up a fuss.

it's generally just easier to run same wheel and tyre specs front to rear, which is why most people do it, but there is nothing saying you have to

Link to comment
https://www.sau.com.au/forums/topic/281589-wheel-help/#findComment-4745173
Share on other sites

225 and 235, different sizes so different rolling heights. i wouldn't want any more than about 3mm difference in rolling height front to back on my car and the difference between a 225 and 235 will be bigger than that

D.

Link to comment
https://www.sau.com.au/forums/topic/281589-wheel-help/#findComment-4745690
Share on other sites

dave, don't forget his rear wheels are half inch wider. i'd think it would be ok (without checking, which i have recommended he does himself) but i'll admit you'll know more about tyres than i ever will :P

it also gets tricky if they are different tyre brands as there can be quite a variation in the way tyres bead up even though they say they are the same sizes

Link to comment
https://www.sau.com.au/forums/topic/281589-wheel-help/#findComment-4745697
Share on other sites

been told by a mech, who had someone come in with different size rubbers.

he said at 80-100ks it would start to vibrate and almose feel like the back wheels are trying to overtake the front wheels.

so not a wise thing to do with the AWD system, it was on a series one stagea too.

Link to comment
https://www.sau.com.au/forums/topic/281589-wheel-help/#findComment-4745865
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...