Jump to content
SAU Community

Recommended Posts

Originally posted by Steve

And Timmmayyy, I did get told that about mods, when I started asking him specifics about mods, he told me to just bring the car down once it is all done.

That's very kind of him.

Someone else I talked to before, told me to return the mod to where I purchase it. I was then told to get it emission check only.

I called back another time and they now said I need emission test and engineering report ;)

BTW What has it got to do with the government whether a more powerful car need a brake upgrade? I thought braking distance is related to mass, brake efficiency and SPEED. There is no relation to power at all unless one speed or brake and gas at the same time. Does the government automatically think that you will break the speed limit with a more powerful car?

Good work Steve.

When you have your petition ready I will gladly support/sign with my email. I think we should use email names rather than our real names to save hassle later on.

Yep Cheeky is right - the system is so easily manipulated.

Just spoke to one of the guys here and he said there's not really much you can do except try to get the issue investigated, which is not easy!

He agrees that collecting statements, taking stat decs, writing to the AG etc are good ways to try and get someone to take notice of whats going on, but in all honesty, it will probably always happen and they will continue to interpret the laws how they wish. In the long term there's not much we can really do about it :(

More power = better acceleration = reduced reaction time = increase braking capacity to compensate.

The thing is, I have looked into this extensively, and the only reference I could find to increasing brakes co-incides with increasing capacity. I dont think this is a bad thing, but I dont see why it should cost you 2K+ to have a report drawn up and then have the guys at regency throw their two bobs worth in and fail it because they are in a bad mood.

Over east, guys can get a engine swap certified for under $200, brake upgrade, less than $100. I rang a guy in sydney (who is fully certified, and a member of IE Aust, and SAE-A) he quoted me no more than $500 for a car with sus mods, turbo mod, clutch, brakes, cams, plenum, exhuaust, ECU and EBC. And the guys in NSW dont have their certs questioned because they are experts, not the guys doing the examining.

Alot of mods can get certs when you go through vehicle inspection stations. WA is a good example, costs $30 for up to 6 mods, $60 for up to 12. The inspection station will look at it, if its all done correctly and nothing is faulty (ie they inspect it) they will issue you with a cert.

So when you are pulled ove and a copper says 'that pod doesnt look legal' you pull out the cert, he pulls his head in. Its alot fairer than the system here.

I hear what you guys are saying about the legal system. But dammit, I am sick of sitting back whist guys are being raped by these bullshit rules and apparent discriminate defecting without having any bloody knowledge of what they are actually defecting - the burden of proof should be belong to the law, not the individual - and being penalise becuase a cop 'thinks' something 'may' be illegal is totally unnaceptable.

And my other main bitch is, if we are expected to comply with these laws - there is a duty to provide copies of the laws to concerned individuals, to do otherwise, AFAIK, is not legal, and these buggers that wont supply the info that they expect people ot comply with should be lined up and taken to task. THEY are not the law, THEY must follow the law like everyone else.

If you think this is being excessive, I give you the example of a guy who owns a mechanicaal workshop (names not necessary, but I guarantee you all would know who I am talking about) he told me that he isnt sure, sometimes they pass cars with certain mods, sometimes they dont. Business is also starting to get pissed off.

"More power = better acceleration = reduced reaction time = increase braking capacity to compensate"

I dont think there is any proven research to prove that:

better acceleration = reduced reaction time

Reaction time is an individual thing.

It's another BS from government :(

Good work Steve - hopefully your ear at the AG's office can do something to help out!! :(

Also, legally they should provide you with a copy of the ADRs if you request a copy. There is no reason whatsoever that they should refuse a copy to anyone - its definitely not their problem if you can understand the ADRs or not! Thats a pretty poor excuse that they're using!

9krpm, the faster you travel, means the further you move during any give period of time, ie, the distance traveled will increase before you can react.

I am not sure if this is the reasoning or not. I could only find reference to a requirement to ensure that brake capacity is not exceeded when the cubic capacity of an engine is increased beyond 155 of the largest displacement engine fitted in that model car, ie, if you owned a CA18 powered S13, then fitted an SR20, you could increase the capacity to 2.3L without doing any brake upgrades, however if you went to 2.4L, you would be required to do testing to ensure braking capacity is not exceeded - this is laid out in the road traffic act.

Steve, have just done a bit of searching, not sure if you've already seen this website, but its just a short overview of each ADR. Looks like you can buy a complete copy on CD Rom for about $70.00.

http://www.dotrs.gov.au/transreg/str_adrindx.htm

Thanks Miss*33, I have ordered a copy.

I wonder why the regency guy I spoke to never knew of the existance. And that he couldnt provide any guidance to me, the customer. More points to raise.:(

Now I just need to find out how and why regency apply the rules, as there is so much discrepency between different states, they must have guildlines for the application. Or maybe they dont and this is the problem?

Steve, that's the point I am making.

It's SPEED (=heavy right foot :)) and not ACCELERATION (=power of the car) that affects the braking distance. The government just like to confuse this point to make more $$$. The government just automatically, or should I say undeducately or what ever their motive was, assumed that the more powerful car will travel faster. We all know that speed has nothing to do with power of the car....it's how you drive it.

Thank you for your research about the engine size vs braking capacity. That is very helpful for my case :( Thx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have no hard data to report, but I have to say, having driven it to work and back all week, mostly on wet roads (and therefore mostly not able to contemplate anything too outrageous anywhere)..... it is real good. I turned the boost controller on, with duty cycle set to 10% (which may not be enough to actually increase the boost), and the start boost set to 15 psi. That should keep the gate unpressurised until at least 15 psi. And rolling at 80 in 5th, which is <2k rpm, going to WOT sees the MAP go +ve even before it crosses 2k and it has >5 psi by the time it hits 90 km/h. That's still <<2.5k rpm, so I think it's actually doing really well. Because of all the not-quite-ideal things that have been in place since the turbo first went on, it felt laggy. It's actually not. The response appears to be as good as you could hope for with a highflow.
    • Or just put in a 1JZ, and sell me the NEO head 😎
    • Oh, it's been done. You just run a wire out there and back. But they have been known to do coolant temp sensors, MAP sensors, etc. They're not silly (at Regency Park) and know what's what with all the different cars.
    • Please ignore I found the right way of installing it thanks
    • There are advantages, and disadvantages to remapping the factory.   The factory runs billions of different maps, to account for sooooo many variables, especially when you bring in things like constantly variable cams etc. By remapping all those maps appropriately, you can get the car to drive so damn nicely, and very much so like it does from the factory. This means it can utilise a LOT of weird things in the maps, to alter how it drives in situations like cruise on a freeway, and how that will get your fuel economy right down.   I haven't seen an aftermarket ECU that truly has THAT MANY adjustable parameters. EG, the VAG ECUs are somewhere around 2,000 different tables for it to work out what to do at any one point in time. So for a vehicle being daily driven etc, I see this as a great advantage, but it does mean spending a bit more time, and with a tuner who really knows that ECU.   On the flip side, an aftermarket ECU, in something like a weekender, or a proper race car, torque based tuning IMO doesn't make that much sense. In those scenarios you're not out there hunting down stuff like "the best way to minimise fuel usage at minor power so that we can go from 8L/100km to 7.3L/100km. You're more worried about it being ready to make as much freaking power as possible when you step back on the loud pedal as you come out of turn 2, not waiting the extra 100ms for all the cams to adjust etc. So in this scenario, realistically you tune the motor to make power, based on the load. People will then play with things like throttle response, and drive by wire mapping to get it more "driveable".   Funnily enough, I was watching something Finnegans Garage, and he has a huge blown Hemi in a 9 second 1955 Chev that is road registered. To make it more driveable on the road recently, they started testing blocking up the intake with kids footballs, to effectively reduce air flow when they're on the road, and make the throttle less touchy and more driveable. Plus some other weird shit the yankee aftermarket ECUs do. Made me think of Kinks R34...
×
×
  • Create New...