Jump to content
SAU Community

Recommended Posts

THERE IS A GOD!

I just got pulled over about 10min ago and cop asked me to pop the bonnet hadn't done n e thing wrong and was sitting on the speed limit.....

I thought ok here comes the yellow sticker, seen my BOV, measured up my steering wheel and ride hide and said it was too low and my stering wheel was too small even tho i have passed every time with it?!?!?!?!?!?

And then came the wierd part..... "Now mate i'm gonna let you off but if i see you again and those things are not fixed i will pull you over and defect you for them"

Oh my god let off!

There is a god and it also shows that not all cops are that bad!

But i can tell you now that those things are about to be fixed!

He was also a traffic cop which made this all the more unbeleivable!

I've had a fair bit of luck too! Touch wood!!!

Been pulled over three times in the past month and only got a fine once for doing 92 in a 60 zone on West Tce, plus my mate said i had a 30cm flame hanging out and still didn't get defected!!

But I'm sure my day will come and then use will all be laughing at me! Look forward to it????

We all do the wrong thing from time to time, but a bit of common sense on the roads would go a long way to improving our (imports & modified car owners in general) image. I'm not suggesting we never ever dare to exceed posted limits, or accelerate heavily to the limit, but a bit of common sense & descretion as to when & where we "enjoy" our cars is a good idea.

That said I think the damage was done long ago & we will all pay for it for a long time to come :P We pay for it in the form of higher insurance premiums (or rejection of insurance for younger drivers!) & additional negative focus by SAPOL & Regency Park.

Or ILUVTPTSA

The petition is being run concurrently by SKYLINED.

I agree that a bit of discretion goes along way - I was told by a member of the EPA, that the police did such a good job of defecting cars over the christmas period, that regency told them to put the brakes on for a while as they didnt have the manpower to handle all the cars coming through.

Heresay, but I do trust the word of the guy who told me, he is reasonably high up with them. He is the one that told me about 'rally reg', that get automatic exemption on alot of things, like no cat, 96db exhausts, they have an entire book out that details exactly what mods you can do that are outside current road traffic act limitations.

sounds like you're finally gettin some lucky with getting bits and piece's of information from the nutcases at regency steve.

Although i have to admit that i've seen nearly as many cops out recently as normal.

Haven't been inspection stations down @ the bay nor on Rundle Street next to target.

Hey PPL.

Sorry steve i have missed heaps of this tread.

I had another aweful experience just b4 christmas.

For those that don't know i am an Adelaide based importer specializing in 15yr old imports.

I had a white 1988 Stock Rx7 to take thru.

I was first up at 8am, now i got knocked back for.......

washer jet wasn't aimed 100% at rear windsecreen and same for front. (rx7's have 2 jets in one on either side) one of each did hit the windscreen

turbo timer wiring which once they pulled it hard enough came out and guess what...... now the power aeiral doesn't work

tyres which had 75%tread left but were mounted on r32 skyline wheels.

reflectors on the lower rear quarters. because they were red!!!!!

5.5 hrs later these incompetent wankers passed me.

Now i chased it all up and everything on this car was 110%legal.

Something has to be done.

Glenn

  • 4 weeks later...

Still ploding along :P I havent given up yet. I keep discovering new interesting things every week.

If you want to keep track of what they say please do. And dont be scared to ask as many questions as you can about getting cars modded, as inconsistancy between different people is one of the major problems with the joint IMHO.

Thanks for your support

Steve

I agree totally Steve. A mate of mine just bought a Evo 3 from Victoria, (technically its a GSR modified into an Evo 3 as you cannot import Evo 3's in Australia.) However, all the modifications have been approved and the car came accompanied with an engineer's certificate for ALL modifications, and was cleared and registerd in Victoria, complies with all ADR's and then he gets it here and Regency says, sorry we don't care about your engineer's certificate or the fact that the car's already been registered in another state, we want a full inspection and we'll tell you when we feel like doing it! The poor bloke tried to explain that he was gonna be in breach of contract if the car isn't registered with SA plates under his name within 2 weeks and they didn't even give a f**k!! I mean the car was Aus. Delivered to begin with and has already been cleared!!

MTX Imports, its totally out of control there, they need to be put out to pasture, and the responsibility to comply modifications given to the profesionals instead of this bunch of retired bus conductors and frustrated mechanics who probably cant cut it in the real world.

any chance your mate could drop me an e-mail detailing in his own words what happened?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...