Jump to content
SAU Community

Need To Get Rid Of Some Parts

RB ONEVIA

By RB ONEVIA,
in Australian Capital Territory

 Share

Recommended Posts

RB ONEVIA Collaborator

RB ONEVIA

Posted
Posted

ok i need to get rid of these asap. all left over from an unfinished project. all new and unused. all were for RB20DET.

Garrett GT3071R, T3 flange, 56 a/r, .64 rear housing.

Xtreme clutch and flywheel, single plate, good for 300kw.

Nismo 600cc injectors, purple, also good for some RB26.

HKS 256* exhaust cam and camgears, gears for any RB engine.

$3000 the lot as prefer to sell as a whole but just need it all gone. pics on request but im sure you know what they look like.

that is all....

Link to comment
https://www.sau.com.au/forums/topic/281797-need-to-get-rid-of-some-parts/
Share on other sites
RB ONEVIA Collaborator

RB ONEVIA

Posted
  • Author
Posted

yes you will need a computer. i was going to use a haltech that ed from autotech was going to get for me. fuel pump if you dont already have one. boost controller. the turbo is fitted with a 14psi actuator. turbo will need a spacer plate to keep the comp cover away from the ex manifold.

RB ONEVIA Collaborator

RB ONEVIA

Posted
  • Author
Posted
but thatd be it you reckon???

unfortunately im not in need of a clutch...willing to seperate???

yeah im pretty sure. i took all the parts in to ed to look at and he told me all that needed to be done.

you might need it one day lol.

How much for the exhaust cam. and also whats the part number?

seeing how i go selling the lot first or if there is enough interest in each part then yeah. i think i got sent the intake cam papers. the only thing i can see on it without taking it out of its bag are '2', '708', 'N174' and 'HKS'. but the part number is 2202-RN175.

  • 2 weeks later...
putraged Rising Star

putraged

Posted
Posted

umm, R32 R33 R34 GTR and R34 GTT use pull type. R32 & R33 GTs-T and the N/A skyline use the push type. CMIIW.

i guess RB20 and RB25 have different diameter size.

mannn, if u can do layby for the turbo, i'll prolly take it. since we're in the same town. lol.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

      Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...