Jump to content
SAU Community

Recommended Posts

Wrecking R33 GTST Series 1

Body Panels not for sale except driver's side guard (gun metal)

All mechanical parts in good working condition.

Everything for sale.

Gearbox (filled with Redline Light Weight Shockproof gear oil)

Tailshaft

Factory BOV

Diff

Radiator

Motor

AFM

Brakes

Arms

Exhaust

Floor Mats

Etc.

All mechanical parts in perfect working condition. Ask me if you want anything in particular.

Aftermarket bits:

HKS BOV with RB25 adaptor

Autogauge Boost Gauge (Stepper motor series)

3inch Bell Mouth Dump Pipe (bolts on to standard RB25 turbo)

3inch Stainless Cat Back Exhaust

Bilstein shocks travelled 2000kms (Sydneykid set up)

Exedy Heavy Duty Clutch Plate with Custom Built Pressure Plate used less than 3000kms (1.1 ton Clamping force)

Ikeya Formula Caster Rods with rubber bushes used less than 2000kms

Yellow Jacket Coil Packs almost new (bought 1month ago, used less than 1000kms)

Turbo Tech Boost Controller

KNN Pod Filter

GK Tech Deep Dish Steering Wheel (used less than 5000kms)

R33 Dash Mat

Cusco Front Strut Brace

Bride Copy Seats

Volk TE37 17inch (8.5 x 30 front) (9.5 x 35 rear)

Sits flush on R33 guards. Comes with Federal 595RS semi slicks (235/45 80%tread front) and Continental ContactSport2 (245/45 rear 50% tread)

Rays light weight lock nuts (Gun metal colour)

R34 GTR Standard Rear Sway Bar 24mm (comes with bushes) fits straight onto R33

UAS Brake Master Cylinder Stopper (like new)

Everything located in Sydney.

If there's anything you're after in particular, just ask me!

Contact me at 0433 712 092. Call / sms anytime, anyday.

Edited by bin
Link to comment
https://www.sau.com.au/forums/topic/282538-wrecking-r33-gtst-series-1/
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

PMs replied.

Forgot to add that there's also a standard computer which has been remapped by Toshi on the forums.

Tuned for : Pod filter, 3inch exhaust, Front mount intercooler, 10psi boost.

how much for the cusco front sway bar? got a pic of it?

you sellin the dash cluster? how many kms on it?

how much for the remap ecu?

where u located?

thanks

Its not a sway bar. Its a strut brace. Asking $90. Don't have pics at the moment will upload asap but I'm sure we all know what a strut bar looks like.

Cluster is for sale. 137xxxx kms on it. Asking $110.

Toshi Remap ECU $400.

All parts located in Kogarah, Sydney.

how much for rear brake assembley?

thanks

Would actually prefer to sell the whole front / rear 5stud assembly together. If some one is willing to take the front, I'll let the rear go for $280.

Alright guys asking for pics, I'll try and get them up asap. Car is at the workshop now so I gotta find time to go down and get pics.

Anyway, I'll put up prices for the more popular items.

Full RB25 motor with turbo - $1900

Gearbox - $1100

Front Strut Brace- $90

Yellow Jacket Coil Packs - $300

TE37s - $1300

Bilsteins- $900

Full front/rear 5stud assembly with brakes and rotors - $650

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...