Jump to content
SAU Community

Recommended Posts

Wrecking R33 GTST Series 1

Body Panels not for sale except driver's side guard (gun metal)

All mechanical parts in good working condition.

Everything for sale.

Gearbox (filled with Redline Light Weight Shockproof gear oil)

Tailshaft

Factory BOV

Diff

Radiator

Motor

AFM

Brakes

Arms

Exhaust

Floor Mats

Etc.

All mechanical parts in perfect working condition. Ask me if you want anything in particular.

Aftermarket bits:

HKS BOV with RB25 adaptor

Autogauge Boost Gauge (Stepper motor series)

3inch Bell Mouth Dump Pipe (bolts on to standard RB25 turbo)

3inch Stainless Cat Back Exhaust

Bilstein shocks travelled 2000kms (Sydneykid set up)

Exedy Heavy Duty Clutch Plate with Custom Built Pressure Plate used less than 3000kms (1.1 ton Clamping force)

Ikeya Formula Caster Rods with rubber bushes used less than 2000kms

Yellow Jacket Coil Packs almost new (bought 1month ago, used less than 1000kms)

Turbo Tech Boost Controller

KNN Pod Filter

GK Tech Deep Dish Steering Wheel (used less than 5000kms)

R33 Dash Mat

Cusco Front Strut Brace

Bride Copy Seats

Volk TE37 17inch (8.5 x 30 front) (9.5 x 35 rear)

Sits flush on R33 guards. Comes with Federal 595RS semi slicks (235/45 80%tread front) and Continental ContactSport2 (245/45 rear 50% tread)

Rays light weight lock nuts (Gun metal colour)

R34 GTR Standard Rear Sway Bar 24mm (comes with bushes) fits straight onto R33

UAS Brake Master Cylinder Stopper (like new)

Everything located in Sydney.

If there's anything you're after in particular, just ask me!

Contact me at 0433 712 092. Call / sms anytime, anyday.

Edited by bin
Link to comment
https://www.sau.com.au/forums/topic/282538-wrecking-r33-gtst-series-1/
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

PMs replied.

Forgot to add that there's also a standard computer which has been remapped by Toshi on the forums.

Tuned for : Pod filter, 3inch exhaust, Front mount intercooler, 10psi boost.

how much for the cusco front sway bar? got a pic of it?

you sellin the dash cluster? how many kms on it?

how much for the remap ecu?

where u located?

thanks

Its not a sway bar. Its a strut brace. Asking $90. Don't have pics at the moment will upload asap but I'm sure we all know what a strut bar looks like.

Cluster is for sale. 137xxxx kms on it. Asking $110.

Toshi Remap ECU $400.

All parts located in Kogarah, Sydney.

how much for rear brake assembley?

thanks

Would actually prefer to sell the whole front / rear 5stud assembly together. If some one is willing to take the front, I'll let the rear go for $280.

Alright guys asking for pics, I'll try and get them up asap. Car is at the workshop now so I gotta find time to go down and get pics.

Anyway, I'll put up prices for the more popular items.

Full RB25 motor with turbo - $1900

Gearbox - $1100

Front Strut Brace- $90

Yellow Jacket Coil Packs - $300

TE37s - $1300

Bilsteins- $900

Full front/rear 5stud assembly with brakes and rotors - $650

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...