Jump to content
SAU Community

Recommended Posts

OK, the time has come!

I am organising a paintball outing for club members.. this will be a casual punter day with possibly a beer down at the Serpi Tavern afterwards.

Date: Sunday, 25th October 2009

Time: 12:00pm (best to arrive about 11:30am)

Venue: Action Paintball Games WA, Punrak Rd Serpentine

Will require a $50 deposit the week before which covers a basic marker and goggles hire and you get a free 100 balls for depositing early. After that, pricing is as follows:

pkgInsert.jpg

There are also 3 levels of upgraded markers available:

$20 upgrade - BT4 Combat, mechanical marker with an agitating hopper. Better barrel and slightly higher rate of fire compared to the base gun.

$30 upgrade - SmartParts Ion, entry level electro-pneumatic marker. Huge rate of fire compared to the mechanical markers.*

$40 upgrade - SmartParts Shocker, tournament level electro-pneumatic marker. Huge rate of fire and better barrel than the Ion.*

*I highly suggest that if you decide to go for one of the electro markers, that you also get a large paint package because you will chew through the paint rather quickly.

Camo overalls are provided and it's best not to layer up big time underneath because you'll get rather hot in there. Some sturdy shoes that you don't mind getting dirty is also the go :thumbsup:

Attendees:

- bubba

- R Dirty 3

- Mr Keets

- Marco

- Ossie 21

- Pattygtst

Edited by GTS-t VSPEC
Link to comment
https://www.sau.com.au/forums/topic/283354-sauwa-paintball-day/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

$100-150 is a good day out paintballing.

If you're getting a mechanical marker then a SCOUT or TROOPER package is good.

If you're getting an electro then a COMMANDO or TERMINATOR package is the go.

The 2000 round package seems to be a bit much for most people even with electros.

The electros are the most fun and I'll let you all have a fingerbang of my favourite toy too :P

Edited by bubba

Once we have more of a list of people (and closer to the date) I will start taking desposits. The deposit covers your initial equipment hire, 200 balls and a free 100 balls, any extras (paint packages/upgrade markers) will need to be sorted out on the day once you get there.

P.S. I'll need a mod to add people to the list!

Edited by bubba
Hmm....should I really spend my birthday being shot in the nuts (probably) all afternoon??

Survey says....yes

Absolutely!

Mary spent her birthday standing on the side of the field getting shot at.. at least you'll be able to shoot back!

  • 4 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...