Jump to content
SAU Community

Recommended Posts

front cross member $40

right hand rear tail lights x2 $50 each

rear steel rio $30 each

rear window $80

1/4 windows $40 each

clock spring $65

clutch master $70

clutch slave $70

alternator $70

series 2 white rear garnish $40

series 2 white boot lid $50

r33 rear cut $250

r33 front cut $250

brake master cyclinder non abs $70

abs s2 motor $100

roof linning $30

sunvisiors $30 pair

parcel shelf $40

rear parcel shelf speaker holders $30 pair

full set of seat belts $100 ono

s2 hicas rear rack $70

s1 & s2 steering rack $80

s1 & s2 front castors $60 pair

s1 & s2 rear axles $60 pair

rear r33 s1 and s2 calipers $120 pair

rear discs $50 pair good condition

front tanabee struts and springs $140 pair

right hand front lower control arm x 2 $40 each

r33 front damaged shell with compliance not listed as damaged anywhere $750 have front cut to fix

r33 jap fibreglass wing think its a trust copy $60

r33 s2 sideskirts have a crack on rhs one $80 pair

r33 a pillar plastics $50 pair

r33 interior plastics have all of them $offer

r33 series 1 rear quarter interior panels $40 pair

all items located in melbourne's northern suburbs

call 0402090079

lots of other bits avaliable just ask . dont have front end bits like lights motor bonnet guards front bar or front rio but have most of other parts required

Edited by SXC_R33
Link to comment
https://www.sau.com.au/forums/topic/283527-r33-gtst-s2-parts/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...