Jump to content
SAU Community

Recommended Posts

front cross member $40

right hand rear tail lights x2 $50 each

rear steel rio $30 each

rear window $80

1/4 windows $40 each

clock spring $65

clutch master $70

clutch slave $70

alternator $70

series 2 white rear garnish $40

series 2 white boot lid $50

r33 rear cut $250

r33 front cut $250

brake master cyclinder non abs $70

abs s2 motor $100

roof linning $30

sunvisiors $30 pair

parcel shelf $40

rear parcel shelf speaker holders $30 pair

full set of seat belts $100 ono

s2 hicas rear rack $70

s1 & s2 steering rack $80

s1 & s2 front castors $60 pair

s1 & s2 rear axles $60 pair

rear r33 s1 and s2 calipers $120 pair

rear discs $50 pair good condition

front tanabee struts and springs $140 pair

right hand front lower control arm x 2 $40 each

r33 front damaged shell with compliance not listed as damaged anywhere $750 have front cut to fix

r33 jap fibreglass wing think its a trust copy $60

r33 s2 sideskirts have a crack on rhs one $80 pair

r33 a pillar plastics $50 pair

r33 interior plastics have all of them $offer

r33 series 1 rear quarter interior panels $40 pair

all items located in melbourne's northern suburbs

call 0402090079

lots of other bits avaliable just ask . dont have front end bits like lights motor bonnet guards front bar or front rio but have most of other parts required

Edited by SXC_R33
Link to comment
https://www.sau.com.au/forums/topic/283527-r33-gtst-s2-parts/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...