Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

fark that car is outrageously quick if it only has 650hp...good work! its abolsutely killing those cars on the straights and still going thru the corners well.

well driven too

do you have more specs/info/pics of the car?

I think Power figures are Over quoted in Australia. The Dyno says more but the Turbo wont flow more than 650fwhp, Thats why I quoted the more real figure. The Engine ia an RB25, Stock head with Poncams, Greddy intake,6Boost manifold, Wolf V500 ECU, GT35 with small exhaust housing, CP pistons and Rev rods,All About 4 years old now, It started out in Hill climbs/Speedevents Also.Uses KW Coil overs and Arizona Zcar Willwood brakes, PPG gearbox

When we get the chassis right we will run an RB26/30 with a Spool 3.4 crank, Ive talked Steve into letting us sort handling before we fit it.

New Engine Package is around 900HP, As you can see Steve still has a bit to learn and we still have suspension issues so it can sit and wait.

My Son Jeff Built most of the car.

Some early Build pics here. http://s249.photobucket.com/albums/gg225/Stevethomas/

All co-incides when he clipped the ripple strip on the S bend. May have unsettled the car to lose traction, but looks like it may have caused the driver to give the accelerator an unintentional jab at that time.

Boost obviously comes on really hard, so balancing the grip and torque in the wet would no mean feat.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...