Jump to content
SAU Community

Recommended Posts

I have a r33 GTST with i think superlight weight shockproof oil. (blue in colour) The car now makes some decent power and after some hard driving, quite alot of gearbox oil has come out the breather, so now l have decided to change the gearbox oil as well as the diff oil. I just bought some heavy shockproof oil thinking that this was the oil in the gearbox but, opening the bottle l noticed that it is red in colour meaning the oil that is in my box is either light weight or super lightweight. Has anyone used super heavy shockproof in there gearbox and what is the shift like. Thanks.

Link to comment
https://www.sau.com.au/forums/topic/284677-redline-heavy-shockproof-oil/
Share on other sites

i wouldn't run either oil in your gearbox if its a servicable unit. Castrol Syntrax is what you should be using. Id only put Redline Lightweight shockproof in a worn gearbox thats difficult to shift as a temporary measure until box is rebuilt.

Have used Lightweight Shockproof in many 33's without issues of any kind. 100% of the time the customer reports smoother shifting.

Heavy shockproof will cause a notchy shifting feel

Notchy only when cold I have found... once warm it is smoooth as silk

I thought lightweight shockproof was only recommended as a stop gap to keep worn boxes going a bit longer. Wouldnt you have been better of with MT90? Since you've got a shiny new gearset it might be worth ringing up Redline and speaking to them directly to get the info straight from the source...

This seems to be a continual source of confusion, I ran MT90, my box didn't like it, Redline Lightweight shockproof is smoother.

If you read carefully, the American redline website does NOT recommend due to some regulations.

The Australian website DOES recommend it, and I've seen it written in there books.

If you end up buying some, its expensive, try performancelub.com , I don't think heavy shockproof is for any skyline....

My gearbox is in perfect nick, I put lightweight shockproof in it just because I've got some crunching at the track (and only at the track) with the previous fluid (most likely genuine nissan gearbox fluid)

It's a 2000 KM old OSG 5 speed. Fresh as a daisy.

I thought lightweight shockproof was only recommended as a stop gap to keep worn boxes going a bit longer. Wouldnt you have been better of with MT90? Since you've got a shiny new gearset it might be worth ringing up Redline and speaking to them directly to get the info straight from the source...

This seems to be a continual source of confusion, I ran MT90, my box didn't like it, Redline Lightweight shockproof is smoother.

If you read carefully, the American redline website does NOT recommend due to some regulations.

The Australian website DOES recommend it, and I've seen it written in there books.

If you end up buying some, its expensive, try performancelub.com , I don't think heavy shockproof is for any skyline....

Interesting - was this a newly rebuilt box? IIRC there was post ages ago from someone who had problems with a rebuilt box and light shock.

My gearbox is in perfect nick, I put lightweight shockproof in it just because I've got some crunching at the track (and only at the track) with the previous fluid (most likely genuine nissan gearbox fluid)

Umm, you says its in perfect nick but it crunches? Call me stupid but wouldn't that imply its clearly NOT in perfect nick? Or are brand new boxes known for crunching gears?

So you have a 5 gear set in the standard case? Who supplied the synchros and are they genuine items?

Yes thats right. OSG 1,2,3 with heavy duty input shaft and I chose to use a stock Nissan 5th gear as it is taller then the OSG item. Synchro's are all genuine, most of which came out of the box I smashed to bits. That box had 11,000 KMS on it.

Some people are totally for the redline stuff, yet others wont go near it. On a side note when the new Nissan 5 speed box went in Just Jap wouldnt warranty the box unless Redline lightweight went into it.

Umm, you says its in perfect nick but it crunches? Call me stupid but wouldn't that imply its clearly NOT in perfect nick? Or are brand new boxes known for crunching gears?

Note I said only at the track, all Nissan 5 speeds have the common redline 3rd to 4th crunch gear change (if shifted quickly), i believe it's a design fault with the 3rd and 4th gear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...