Jump to content
SAU Community

Crazy Mazda We Tuned Up On The Weekend

dmac_25

By dmac_25,
in Victoria

 Share

Recommended Posts

  • 2 weeks later...
dmac_25 Grand Master

dmac_25

Posted
  • Author
Posted

Yeah jesse its one crazy car skipping lanes no problems.

Changed badges did you justin last i seen you had a 13.

Fair ramp Paul pulled f'n hard come up nice on the rollers puts my car to shame.

Needs a 3 bar map sensor and some more boost and will be a crazy wagon

jesiotrot Enthusiast

jesiotrot

Posted
Posted

Its a 2 litre motor. The 1.8 is the BPT found in the laser and 323's.

The engine code is FE-DOHC. It comes factory in the Jap, NZ and European 626's. Never came factory turbo though.

David also tuned my 626, but with a mere 230kw its no match for the white one!

jesiotrot Enthusiast

jesiotrot

Posted
Posted

This car has a Toyota 4AGZE gearbox in it, with a custom made adaptor plate, you could bolt one of these 2litre motors into your toyota with our plate , you'd only have to make one mount :(

KURAUN Grand Master

KURAUN

Posted
Posted

yeh but itll be a lot more work to get the mazda motor to rwd than the toyota motor id reckon

either way i already have the 20v

plus i duno how itll go engineering a 2litre turbo in an originally 1.3 sohc carb :P

dmac_25 Grand Master

dmac_25

Posted
  • Author
Posted

dont be a girl nick the mazda 2.oL goes bloddy hard would break the old toyota in half.

you better be bringiing it to me to work on.

Hey West we can do pretyy much anything tell me more on what you need done?

Matty for sure let me know when you want it done now using Martini oil so she will be looked after

KURAUN Grand Master

KURAUN

Posted
Posted
dont be a girl nick the mazda 2.oL goes bloddy hard would break the old toyota in half.

you better be bringiing it to me to work on.

Hey West we can do pretyy much anything tell me more on what you need done?

Matty for sure let me know when you want it done now using Martini oil so she will be looked after

lol yeh i know ill get ripped

but i still like the old toyota, plus wanted it to stay toyota on toyota action :thanks:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...