Jump to content
SAU Community

Recommended Posts

Its been happening for quite a while now, was fine when driving the car... just topped it up and all was well. Can see it peeling the paint off the booster.

Since defect it sat for 3 weeks, (completely forgot about it) which gave it long enough time to completely empty itself. Now with air in the system, brakes are useless.. So cant drive it to get repaired...

So my question is, should I just take it off & get the seals redone? Or is there more to it then that. Or just buy a completely different unit? Anyone here that can vouch for a place to do it? Was going to just bleed the brakes and put new stuff through it, but seeing as its gonna do it again anyway.. might as well do it once, and do it properly. :)

I would take it off myself, never really looked at the thing so just wondering if its an easy task...

Thanks.. much appreciated. :)

Adam..

Link to comment
https://www.sau.com.au/forums/topic/285023-brake-master-cylinder-leaking/
Share on other sites

  • 2 months later...

both, i could be wrong and R34's for some reason are stupidly expensive, but to give u an idea i paid under $100 for mine in the 32.

i deal with all clutch and brake down here in SA, maybe try them and see if they can send u something.

i just rang nissan here in brisbane they want $460 for a R32 new brake master cylinder and around $190 for a rebuild kit

i'm a bit weary of the rebuild kit though, i really can't be f**ked pulling it apart once to see if it has scoring along the barrel then trying to put it back together so i can drive my car in the 10 days i need to wait for either one depending on the condition of the barrel to come from Japan

http://www.autobrakeservice.com.au/index.php

Still have the baggie, it was sitting in my rubbish for when I clear away that area..

protex 210J0159 is what is on the label.. Make sure it is the 1" master, and I can't remember if it was the nabuko or tokiko, think it was nabuko..

Remove the master cylinder, pull it apart, follow the workshop manual, easy as.. make sure everything is sparkling clean, you don't want any little bit of dirt getting in there. after you remove the piston assembly you can shine a torch in there and you will be able to see if there has been any corrosion, contamination, scoring, etc. In my case it was just old seals that lost tension.

Brakes are better than they have ever been. Transfer case clutchpack decided to die shortly after as well, never ends.

Edited by heller44

Thanks a million Heller44 for you info this will help me alot and hopefully keep my wallet alot heavier as well :( and yes it never ends a love hate relationship.

Cheers,

Dave

Remove the master cylinder, pull it apart, follow the workshop manual, easy as.. make sure everything is sparkling clean, you don't want any little bit of dirt getting in there. after you remove the piston assembly you can shine a torch in there and you will be able to see if there has been any corrosion, contamination, scoring, etc. In my case it was just old seals that lost tension.

Brakes are better than they have ever been. Transfer case clutchpack decided to die shortly after as well, never ends.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...