Jump to content
SAU Community

Recommended Posts

/\/\

Yes they are the same and diret fit, can you elaborate on the options? as there are plenty around for R33's but i havent seen one for an auto yet with the built in cooler/warmer in the radiator.

Racing radiators won't make your car go faster. To elaborate i upgraded the radiator on the car i just wrote off. In the new S1 which i have rebuilt to the same specs I am still using the stock radiator and have done two track days with no sign of overheating. If i have to replace it I will go to a radiator repair shop and buy a slightly thicker one for about $200. I wont be going to the speed shop to buy a Japanese one for $900 or even $300.

i have a s2 and i am running a cooling pro r34 radiator i made my lines that go in to the radiator go to the second trans cooler but if u have upgraded ur stock one just loop the lines up that go into the radiator if u need any help i can explain it to u over the fone just ring me

myles 0432355971

thanks for letting me know it wont make my car go faster lol, i'm just worried about it overheating when i get a front mount in our hot Perth summers just a precausion really for pice of mind, i might just get mine flushed really well and see how it goes. I may try a radiator repair shop also like you said not a bad idea.

Edited by horrace
/\/\

Yes they are the same and diret fit, can you elaborate on the options? as there are plenty around for R33's but i havent seen one for an auto yet with the built in cooler/warmer in the radiator.

ah ok didn't realise there were no auto ones, but figures i guess.

Interesting, this line on an ebay page advertising a Koyo aluminium radiator for R33 GTR:

"Koyo aluminum racing radiators are made for manual transmission applications only, automatic transmissions will require an external transmission oil cooler"

So I wonder if the water exchanger is really necessary? I'll have a chance to ask an expert tomorrow, so I will do just that :D

/\

Yes that's pretty much what I was told too; if upgrading the radiator you have to run a complete bypass setup (big transmission cooler I think). This was not desirable to the expert I spoke to because it takes much longer to bring the transmission up to temperature without the radiator loop which is a heat exchanger that works between the transmission fluid and the radiator coolant. There was no mention of excess wear however; the transmission has a 'warmup' mode where it is privy to the coolant temperature, cold-run etc. and will change the shift mappings/lock out the lock-up solenoid (lol)/lock out the overdrive solenoid etc until it reaches operating temperature (about 60 degrees). This is what you normally notice at startup and for about 5 minutes of driving on a cold morning. Without the heat exchanger in the radiator this may last say 15 minutes or thereabouts. So no 4th gear or overdrive and a sluggish transmission for 15 minutes every start.

yeah that would be hell gay waiting 15 minutes for overdrive since im on the freeway in 2 mins then its 25 mins to work lol. I think im just gonna rip mine out and get it a good flush ey, i was also wondering if something like a R34 auto radiator would be any thicker and direct fit? something to think about.

BTW since i put in my bigger davies craig cooler it definately takes longer to get overdrive, just something i noticed from the extra cooling.

Edited by horrace

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
×
×
  • Create New...