Jump to content
SAU Community

Recommended Posts

Just a random out there one.

I got my first yellow sticker today. I was driving very responsibly down the street when I got pulled over by a Highway Patrol. Apparently my Carbon Fibre bonnet is stronger than a regular car bonnet and it is a hazard to pedestrians when I hit them (like I aim for them or something). Apparently a regular bonnet gives a little when a body hits but a Carbon Fibre one won't. ???

Anyway, now I have 10 days to get it sorted and inspected, but I will be away from Monday for 9 days.

hmmm

Blinky

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/
Share on other sites

If you were to hit a pedestrian at a speed where the bonnet would shatter, the cuts would be the least of his/her worries as they would resemble minced meat from the impact anyway.

Just put your stockie back on and when the lickie is off, go home and put the CF bonnet back on.

Problem solved.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4795918
Share on other sites

If you were to hit a pedestrian at a speed where the bonnet would shatter, the cuts would be the least of his/her worries as they would resemble minced meat from the impact anyway.

Just put your stockie back on and when the lickie is off, go home and put the CF bonnet back on.

Problem solved.

Then get another yellow as soon as he pulls out of the driveway again.

Problem unsolved.

CF is illegal because test dummies get decapitated, or mauled in crash tests

Technically you can get CF passed, but to do so, you need to provide some department with 5 CF bonnets to test out, and then its only passed for that specific vehicle, not every vehicle. The cost to get it legalized would be ugly, if you could actually manufacture CF to guarantee it to fold it set places like regular bonnets do.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796071
Share on other sites

Just for the record, "WooHoo" was written as sarcasm and not as a proclamation of joy or happiness.

I am now looking at ways of making my stock bonnet look nicer, ie adding vents. I dont think the CF is going back on.

Also, a company named "Blits" does offer a legal fibre glass bonnet.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796090
Share on other sites

Just for the record, "WooHoo" was written as sarcasm and not as a proclamation of joy or happiness.

I am now looking at ways of making my stock bonnet look nicer, ie adding vents. I dont think the CF is going back on.

Also, a company named "Blits" does offer a legal fibre glass bonnet.

confirm it for WA not just QLD were they are based

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796100
Share on other sites

Then get another yellow as soon as he pulls out of the driveway again.

Problem unsolved.

The cops would give you a lickie for anything they wanted, permits or not.

Problem will always be unsolved until they are held accountable for handing out bullshit yellows.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796174
Share on other sites

That is an absolute farking joke when 4x4's drive around with great big steel GRATES bolted to the front of them.

Cops dare not anger the 4x4 soccer mums, everyone knows they shouldn't mess with a mob of angry house wives. :)

To the OP, did they yellow you for anything else other than the CF?

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4797464
Share on other sites

The sticker was for the CF bonnet, and in the "Other" section they put the BOV. I have an after market BOV on there but it should be legal as it is plumb back.

Any how, the stock bonnet and original BOV are back on now. I had a fiddle with a few other bits under the bonnet that they may have questioned at the inspection, so as it stands now, I am very confident that the sticker will be off by Tuesday arvo. The only nagging things left on the "Maybe Illegal List" is the 3.5 inch turbo back exhaust (hopefullly no emission test required) and the HIDs Ihave lighting the way.

Fingers are crossed.

Also, the CF bonnet is not for sale yet. I might use it as a chop up to modify my stock bonnet. Unsure yet.

Blinky

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4797592
Share on other sites

The sticker was for the CF bonnet, and in the "Other" section they put the BOV. I have an after market BOV on there but it should be legal as it is plumb back.

Any how, the stock bonnet and original BOV are back on now. I had a fiddle with a few other bits under the bonnet that they may have questioned at the inspection, so as it stands now, I am very confident that the sticker will be off by Tuesday arvo. The only nagging things left on the "Maybe Illegal List" is the 3.5 inch turbo back exhaust (hopefullly no emission test required) and the HIDs Ihave lighting the way.

Fingers are crossed.

Also, the CF bonnet is not for sale yet. I might use it as a chop up to modify my stock bonnet. Unsure yet.

Blinky

let us know if you change your mind about the cf bonnet and decide to sell

cheers

mark

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4798301
Share on other sites

Ok Everybody

My final post for this thread.

My 33 went over the pits today and the results are in. The bonnet is good now that it's stock, BOV is good. Everything else is fine. My windows are over tinted so I need to remove the tint to pass and I need to rig my headlights so the low and high beam stay on together if I put on the high beam. HID's were never questioned.

The inspector took it for a drive and even made comment that it was one of the nicest and smoothest skylines he had ever driven.

Then he dropped the bomb. I have to complete an IM240 emissions test.

I will start a new topic post now titled IM240 Emissions Test. I will go through step by step whats happening so everyone else can be prepared if they ever encounter this dreadful test.

Blinky

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4801636
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...