Jump to content
SAU Community

Recommended Posts

Just a random out there one.

I got my first yellow sticker today. I was driving very responsibly down the street when I got pulled over by a Highway Patrol. Apparently my Carbon Fibre bonnet is stronger than a regular car bonnet and it is a hazard to pedestrians when I hit them (like I aim for them or something). Apparently a regular bonnet gives a little when a body hits but a Carbon Fibre one won't. ???

Anyway, now I have 10 days to get it sorted and inspected, but I will be away from Monday for 9 days.

hmmm

Blinky

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/
Share on other sites

If you were to hit a pedestrian at a speed where the bonnet would shatter, the cuts would be the least of his/her worries as they would resemble minced meat from the impact anyway.

Just put your stockie back on and when the lickie is off, go home and put the CF bonnet back on.

Problem solved.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4795918
Share on other sites

If you were to hit a pedestrian at a speed where the bonnet would shatter, the cuts would be the least of his/her worries as they would resemble minced meat from the impact anyway.

Just put your stockie back on and when the lickie is off, go home and put the CF bonnet back on.

Problem solved.

Then get another yellow as soon as he pulls out of the driveway again.

Problem unsolved.

CF is illegal because test dummies get decapitated, or mauled in crash tests

Technically you can get CF passed, but to do so, you need to provide some department with 5 CF bonnets to test out, and then its only passed for that specific vehicle, not every vehicle. The cost to get it legalized would be ugly, if you could actually manufacture CF to guarantee it to fold it set places like regular bonnets do.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796071
Share on other sites

Just for the record, "WooHoo" was written as sarcasm and not as a proclamation of joy or happiness.

I am now looking at ways of making my stock bonnet look nicer, ie adding vents. I dont think the CF is going back on.

Also, a company named "Blits" does offer a legal fibre glass bonnet.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796090
Share on other sites

Just for the record, "WooHoo" was written as sarcasm and not as a proclamation of joy or happiness.

I am now looking at ways of making my stock bonnet look nicer, ie adding vents. I dont think the CF is going back on.

Also, a company named "Blits" does offer a legal fibre glass bonnet.

confirm it for WA not just QLD were they are based

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796100
Share on other sites

Then get another yellow as soon as he pulls out of the driveway again.

Problem unsolved.

The cops would give you a lickie for anything they wanted, permits or not.

Problem will always be unsolved until they are held accountable for handing out bullshit yellows.

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4796174
Share on other sites

That is an absolute farking joke when 4x4's drive around with great big steel GRATES bolted to the front of them.

Cops dare not anger the 4x4 soccer mums, everyone knows they shouldn't mess with a mob of angry house wives. :)

To the OP, did they yellow you for anything else other than the CF?

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4797464
Share on other sites

The sticker was for the CF bonnet, and in the "Other" section they put the BOV. I have an after market BOV on there but it should be legal as it is plumb back.

Any how, the stock bonnet and original BOV are back on now. I had a fiddle with a few other bits under the bonnet that they may have questioned at the inspection, so as it stands now, I am very confident that the sticker will be off by Tuesday arvo. The only nagging things left on the "Maybe Illegal List" is the 3.5 inch turbo back exhaust (hopefullly no emission test required) and the HIDs Ihave lighting the way.

Fingers are crossed.

Also, the CF bonnet is not for sale yet. I might use it as a chop up to modify my stock bonnet. Unsure yet.

Blinky

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4797592
Share on other sites

The sticker was for the CF bonnet, and in the "Other" section they put the BOV. I have an after market BOV on there but it should be legal as it is plumb back.

Any how, the stock bonnet and original BOV are back on now. I had a fiddle with a few other bits under the bonnet that they may have questioned at the inspection, so as it stands now, I am very confident that the sticker will be off by Tuesday arvo. The only nagging things left on the "Maybe Illegal List" is the 3.5 inch turbo back exhaust (hopefullly no emission test required) and the HIDs Ihave lighting the way.

Fingers are crossed.

Also, the CF bonnet is not for sale yet. I might use it as a chop up to modify my stock bonnet. Unsure yet.

Blinky

let us know if you change your mind about the cf bonnet and decide to sell

cheers

mark

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4798301
Share on other sites

Ok Everybody

My final post for this thread.

My 33 went over the pits today and the results are in. The bonnet is good now that it's stock, BOV is good. Everything else is fine. My windows are over tinted so I need to remove the tint to pass and I need to rig my headlights so the low and high beam stay on together if I put on the high beam. HID's were never questioned.

The inspector took it for a drive and even made comment that it was one of the nicest and smoothest skylines he had ever driven.

Then he dropped the bomb. I have to complete an IM240 emissions test.

I will start a new topic post now titled IM240 Emissions Test. I will go through step by step whats happening so everyone else can be prepared if they ever encounter this dreadful test.

Blinky

Link to comment
https://www.sau.com.au/forums/topic/285620-my-first-yellow/#findComment-4801636
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...