Jump to content
SAU Community

Recommended Posts

# Fits 03-07 skyline v35 2DR Coupe Only

# Hi-Performance Bolt-On Axle-Back Exhaust Muffler

# Direct Bolt-On Design

# 2.25" Piping + 4" Titanium Tip

# This Piping Size is Proven to Make the Most Top End Power Out of This Engine While not Losing any Low End Torque

# High Quality T-304 Stainless Steel w/ Mandrel Bend except the the centre muffler section is made in mild steel

# CNC Machine Flanges with TIG and MIG Welded Construction

# The Light Weight and Fast Air-Flow Design Provides Instant Performance Upgrade

bought it off US ebay for $330 shipped, only had it for a week. asking for $240

the left tips need to be cut and reweld back to straight, any exhaust can do it for couple of dollars, see the first pic (the left tip is point down little bit)

reason for sell is upgrade to whole catback system

it gives a very nice sound with no drone and stupid loud. guarantee the sound is not loud and drone!!! just slightly louder than stock

4 inch titanium tips looks sexy as it is

here is the sound clip

25082009171copy.jpg

01092009177.jpg

01092009178.jpg

01092009179.jpg

Edited by spikey
Link to comment
https://www.sau.com.au/forums/topic/286046-fs-titanium-muffler-for-cheap/
Share on other sites

surely you still have the box it was posted in and just have to go down the post office and send it .... easier than waiting for some random guy to rock up to your house and find out where a nice 350Z lives ....

surely you still have the box it was posted in and just have to go down the post office and send it .... easier than waiting for some random guy to rock up to your house and find out where a nice 350Z lives ....

i already threw out the box lol

i can send u the link where I got it from if u want. really sorry for pulling ur interests out

Hi all, sorry I don't normally jump in to stuff that doesn't directly effect me but I think that if someone says they will buy it first, they should get the option to purchase.

Especially considering there was no mention of 'no postage' in the thread until almost 24 hours after a response that someone wanted it.

Just my two bobs worth, but I think the item should be sold to Nightcrawler, unless he is happy to back off.

Yeah I agree Thorpie .... but it's all good - I have found the same item on US Ebay and can get it shipped for about the same price as he would be able to ship it to me.

And the one I buy might not have the twisted tips that need fixing ....

Yeah I agree Thorpie .... but it's all good - I have found the same item on US Ebay and can get it shipped for about the same price as he would be able to ship it to me.

And the one I buy might not have the twisted tips that need fixing ....

mind sharing that ebay link??

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMEWAX%3AIT

It is super cheap dodgy Chinese crap, but that is all I need for my V35, since I am putting an Apexi exhaust control valve on as well so I can control the volume level. Have an ECV on my R34 now and absolutely love it!

cool thanks.... looks exactly like the one in the OP

some china stuff are actually not too bad quality. i found that in some of the stainless steel exhausts that the fiber packing gets burnt out pretty quick and you do end up with a slight rasp to the note.

having said that....i've had HKS mufflers that droned so much it gave me a headache

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...