Jump to content
SAU Community

Recommended Posts

Hey guys,

I own a yellow R34 25GT, the whole cars basically stock, im planning on getting either 17" or 18" for it and a body kit after

For wheels im looking at this driftek LMGT4-lookalike

http://wheelworx.com.au/drift_tek.html (down the bottom of the page)

does anyone know how heavy those are or have any comments on it or any other suggestions?

im looking for lightweight, 17"/18", below 2k

For bodykit im looking at the impul front bumper and side skirts, they look awesome on black and silver but dunno if they'll look good on yellow, any comments and suggestions are appreciated, thanks guys

awesome on silver

2r739zt.jpg

awesome on black (sorry borrowed someone's pic)

rw8mk2.jpg

the front still looks cool but not as good as black and silver, sides are bit weird on yellow (soz borrowed someone's pic again)

2qtxw1w.jpg

Here are some pics of my skyline

2mx35dv.jpg

k3u3uu.jpg

k9dp5g.jpg

1zgb4th.jpg

2liy1j9.jpg

Edited by NY-NA-34
Link to comment
https://www.sau.com.au/forums/topic/286128-mods-for-my-yellow-34/
Share on other sites

I think you'll find most people like the Impul kit as it's not too over the top and looks nice in any colours, especially lighter colours.. As for wheels, there's just too many to choose from and you should pick something out that YOU like not other forum members.

Check out the DTM rims in the trader section ..they're cheap and always look nice IMO.

impul kit looks good! yellow car + black wheels = win win

lol yea thats my idea

I think you'll find most people like the Impul kit as it's not too over the top and looks nice in any colours, especially lighter colours.. As for wheels, there's just too many to choose from and you should pick something out that YOU like not other forum members.

Check out the DTM rims in the trader section ..they're cheap and always look nice IMO.

i have mentioned one that i like above but i just wanna hear comments from others about it , and also im wondering how heavy they are, thanks for ur comment anyway

best idea, paint it black or bayside blue :P lol.

not intending to spend money on paintjob anytime soon lol

go the Impul kit and dark rims as said above :D

I'm getting the Impul side skirts for my silver 34 - best looking skirts for GT/GTT imo

yea im most likely getting impul :D

Edited by NY-NA-34
first thing i'd do is lose the seat & steering wheel covers :)

driftteks aren't too bad, just dont expect fully light like VOLK TE37 but they are lighter then the general chrome crap from your local tyre place.

the pics were taken like 1 year ago the steering wheel cover is off long time ago and i kept the seat ones just to keep them clean lol

do u know like how many kg or pounds they are?

Nice, you have a yellow 34 as well :)

Personally, I'd prefer the altia kit from nissan, with a east bear lip. Before I bought my 34, I thought the look of a 34 without a body kit was pretty plain, but when I saw the car I have now, I really think I don't need a body kit lol. I think that's because my car has been lowered and it's got 18'' buddy club rims on it, dark colour rims on yellow = sex lol :(

Heres a picture of the rims.

post-40415-1251889243_thumb.jpg

Nice, you have a yellow 34 as well :)

Personally, I'd prefer the altia kit from nissan, with a east bear lip. Before I bought my 34, I thought the look of a 34 without a body kit was pretty plain, but when I saw the car I have now, I really think I don't need a body kit lol. I think that's because my car has been lowered and it's got 18'' buddy club rims on it, dark colour rims on yellow = sex lol :(

Heres a picture of the rims.

post-40415-1251889243_thumb.jpg

nice rims, my cars been lowered as well

i personally prefer 5-spokes my first choice is the one i mentioned above they looks so good

and i think im gonna be getting the impul kit, i just dont like the stock look of it lol

btw how much was ur nismo indicators?

Edited by NY-NA-34
nice rims, my cars been lowered as well

i personally prefer 5-spokes my first choice is the one i mentioned above they looks so good

and i think im gonna be getting the impul kit, i just dont like the stock look of it lol

btw how much was ur nismo indicators?

The indicators were already on there when I bought the car (rims aswell) lol, but you can pick up a pair of side ones off ebay for $99, but the front ones, they are a bit more expensive, its $275 on www.nismo.com.au. But your best bet would be getting them 2nd hand from either a member off the forum or your local wreckers :happy:

The indicators were already on there when I bought the car (rims aswell) lol, but you can pick up a pair of side ones off ebay for $99, but the front ones, they are a bit more expensive, its $275 on www.nismo.com.au. But your best bet would be getting them 2nd hand from either a member off the forum or your local wreckers :happy:

ohk thanks I'd probably get them after i got the wheels and bodykit

what u think about impul front bar + side skirts + this rear bar (dont like the the back view of the impul rear bar)

117cy0i.jpg

ohk thanks I'd probably get them after i got the wheels and bodykit

what u think about impul front bar + side skirts + this rear bar (dont like the the back view of the impul rear bar)

117cy0i.jpg

high mate i saw a yellow 34 the other day with gtr front bar no rear wing and 5 spoke 18' deep dish wheels... And it looked sensational... No GTR badges.

In melb mayb sum1 else has seen it ? Northern suburbs.

high mate i saw a yellow 34 the other day with gtr front bar no rear wing and 5 spoke 18' deep dish wheels... And it looked sensational... No GTR badges.

In melb mayb sum1 else has seen it ? Northern suburbs.

sounds nice but no chance i wouldve seen it im in qld

also im trying to pick between the drifteks and the Lenso D1R (with deep lip), both look nice any idea which one i should get?

Edited by NY-NA-34
sounds nice but no chance i wouldve seen it im in qld

also im trying to pick between the drifteks and the Lenso D1R (with deep lip), both look nice any idea which one i should get?

i think either one is good, as long as they are black :blink: not trying to be racist lol.

i think either one is good, as long as they are black :blink: not trying to be racist lol.

yea im trying to find out the weight of both, i how much they are so just wanna compare weight but no one seem to know how heavy the drifteks are

For the D1R, can u have deep lip in the front as well? how deep should they be do u know?

Edited by NY-NA-34
yea im trying to find out the weight of both, i how much they are so just wanna compare weight but no one seem to know how heavy the drifteks are

For the D1R, can u have deep lip in the front as well? how deep should they be do u know?

i think you are better off giving them a call :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...