Jump to content
SAU Community

Recommended Posts

Morning,

yesterday afternoon i put down a deposit on a n/a r34...couple of questions.

1) the blue plate under the hood/drivers side was etched in...i know if its engraved it means its most likly stolen...but i know etching is different, should i be worried?

2) it has not been regerstered in australia before and its going to be put straight into my name...again...suss???

Overall the car is in good condition, few dints, scratches, but mechanicly it goes great...60,000kms on odo

Im getting a comprahensive inspection tomorrow, where the tester goes to his home. then the car is getting complied, then rwc, then rego...he is doing the compliance, rwc and rego

he seemed like a nice enough guy, seems to import a lot of cars (he had another r34 and a toyota chaser at his house for sale), but you cant be to careful, ya know?

if anyone wants to give anymore information, it would be great!

Im buying through a private sale.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/286178-so-i-just-put-a-deposit-down/
Share on other sites

This isn't that f***ing car that keeps getting advertised here every few months in attempt to pawn it off on some other sucker is it? Researching now...

EDIT: Different colour it seems, but could have been resprayed? I dunno, it just sounds a bit suss that he won't comply it before selling. See these threads for why I jumped to this assumption:

http://www.skylinesaustralia.com/forums/Il...lp-t247731.html

http://www.skylinesaustralia.com/forums/R3...50#entry4637150

its a white 2 door 34 w/ sunroof.

he is complying before sale, along with 12 mnths reho and rwc, it arrived in australia couple of days back, so obviously hasnt had time to be complied, all he has atm is a deposit.

hope that makes more sense

Morning,

yesterday afternoon i put down a deposit on a n/a r34...couple of questions.

1) the blue plate under the hood/drivers side was etched in...i know if its engraved it means its most likly stolen...but i know etching is different, should i be worried?

2) it has not been regerstered in australia before and its going to be put straight into my name...again...suss???

3) Overall the car is in good condition, few dints, scratches, but mechanicly it goes great...60,000kms on odo

4) Im getting a comprahensive inspection tomorrow

5) he seemed like a nice enough guy

Cheers.

1) What do you mean by etched?

2) I was the first to register my car in AUS

3) I'd call BS on the 60,000K's

4) Good on you, who from?

5) Usually the guys trying to screw you over are the nicest, the guys who want the money for their pride and joy drive a hard sale

1) hmm...best way to describe etched...um...the plate is NOT smooth, you can feel the writing..if that makes sense....my dad told me its just the tool they use on all of them, its not engraved as there is NO depth.

2) i also know that the 60,000 is probally bs...BUT i must say that car runs VERY tight.

3) StateRoads is doing the inspection.

4) the guy regulary imports cars, so he after a easy sale, he does seem legit, he was offering information without us asking him...a good sign imo

Dont know what else to say bro, looks like your taking all the right channels, if it looks clean and drives clean then your probably aright, good job with StateRoads tho they do top quality work

EDIT: Out of curiosity whats this guys name? Just curious cause he might be the same guy that did my car

cheers mate, i mean, there are a couple of minor dents, scratches on it...but nothing bad...stateroads is actually doing check today at 2pm so they will tell me what i gotta know. :(

EDIT: the guy's name is Roy...cant remember the surname...car is in Fawkner

Cheers for ya help and advice mate...the compliance and rwc will not be done before inspection, obviously, so hopefully most of the things stateroads pick up will hopefully be done during compliance and rwc.

random question: the xenon lights in the 34's, are they changed for compliance??

its a white 2 door 34 w/ sunroof.

he is complying before sale, along with 12 mnths reho and rwc, it arrived in australia couple of days back, so obviously hasnt had time to be complied, all he has atm is a deposit.

hope that makes more sense

Sorry I misread your first post. In that case it does sound legit.

I wouldn't put it past a 34 having only 60,000km on the clock, particularly if it's a fresh import...my R33 still has only 98,000 and the engine feels too fresh to be anything more than that.

Cheers for ya help and advice mate...the compliance and rwc will not be done before inspection, obviously, so hopefully most of the things stateroads pick up will hopefully be done during compliance and rwc.

random question: the xenon lights in the 34's, are they changed for compliance??

I'm pretty sure only GTR's come with stock Xenon lights so having Xenon's in yours wont pass, but hopefully they wont notice

take a photo of the blue plate and post it up. someone can enter it into FAST and tell you the original details of the car if you have the VIN/chassis number and model code.

Good Idea Matt, wish I thought of that sooner

I've imported 2 cars. The car is always registered in your name since you are the first Australian owner. The only other case would be if purchased the car from a dealer who had already complied and then registered the car for sale. You'd then need to transfer the rego like a normal re-registered car.

Yours sounds a little odd though considering this is a private sale yeah?

With regards to the compliance plate these are usually quite clean and etched light, if it looks like it's been tampered with then that's sus. You should also find the new VIN etc engraved into the cars firewall or wheel arch near the suspension mounting point with the plate. The numbers should match and they should also match the cars original VIN but will be longer.

If you can get a pic of the plate post it up. Should look similar to this plate but will be blue as you said. It should have the details of the compliance agent and the approval number which you can check with the appropriate body.

IMG_7130.JPG

You can also request a copy of the import approval and compliance paper work from the compliance agent. I have copies of mine if you need to take a look just PM me.

thanks for your responces guys, wont be able to get a pic for a while, the build plates are etched in, so no issue with the build plate...i now know what i needeed too know :(

also, stateroads are doing the inspetcion as we speak, so ill have the report by tonight hopefully!

wish me luck...lol..honestly though, the car seems in good nick and as i said, runs very tightly and smoothly

ill let u all know how the inspection report goes!

WRT the blue nissan build plate - the plate in my 33 GTR is smooth. i feel no difference in texture beneath my fingertips at all - as if it has nothing marked on it.

Dunno bout 34s - the new VIN is generally engraved into the strut tower on 33s after compliance.

And James is correct to the best of my knowledge...they may have to take em out, not sure if they can get around it. If not - just put em back in yourself after RWC :(

Yeah, with the xenons, with a proper compliance job, they'd have to take it out, but some people won't bother with it, so just in case, take it out yourself before the compliance and like Kamikazeninja said, put them back in afterwards. But apparently, some people take the xenons out and they even modify the back of the headlights so you can't put the xenons back in.

But at the end of the day, the R34 factory xenons are illegal and my mate was driving a NA R34 on his P's and a cop dicked him for the lights, because they couldn't find anything else that was wrong with the car lol :D

Just wondering...is the deposit refundable? Because I woulda thought that you should get the car checked by a mechanic before you put a deposit down?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...