Jump to content
SAU Community

Recommended Posts

The guys that fitted this kit, did you get an increase in performance?

i would also like to know what performance gains people have gotten with this kit..

Is it much more laggy?

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

wouldnt the GTR cooler be better than this as its already that size if not bigger and flow better due to the bigger end tanks??

jet thank mate!!!! i just install the intercooler look mad feel mad....very nice looking thank...dude

so you just installed it?

Can you feel the difference... much lag?

I would imagin there would be a bit more lag from an rb20?

Ming come out for few runs this weekend.

We got DC5, 200sx, and Supra TT and maybe few others.

druzilla32, whether there is lag or not really depends on what sort of turbo you have and how your ECU is tuned. Its got nothign to do with the intercooler. I dont have any lag problem at all because my car is tuned.

The intercooler makes your pod sounds louder and nicer. It does not change the sound of your BOV.

I can show you mine if you live in sydney.

the only mods i have are catback (get my dump/front and highflow cat in a day or 2) pod filter and boost at 14psi. I dont mind if the turbo slowly shits itself as i plan to go bigger. I am aiming for about 180rwkw.

If i get a reading of 14psi without the fmic.. Will i get a higher reading after its hooked up, say 16psi? Should i turn the boost down then or is it ok cuz the turbo is still only pushing about 14psi..

I want it at about .9bar as i dont often hit boost during the day and at night rarely go over .6bar

If your using a bleed valve you will have to turn it down because the standard cooler drops a few psi where as the hybrid wont (i assume) So if you are running 14psi you turbo is proberby pushing 16/17psi just to make 14psi at the engine. If you have a controller you wont nedd to worry about it.

Jet,

Would you be able to summarise the DIY installation please, including info on cutting the fan blades/ front bumper bar if applicable.

I need to factor in the installation cost in case I can't do it myself.

Thanks mate.

oops forgot to ask you this, Jet.

I have the factory electric fan for the A/C unit, would this need to be moved/ modified for the intercooler fitment ?

eek.. i hope not... I havent realy thought about the stuff i may need to remove.. All i knew is that i wanted a fmic.. so i got one...

I havent seen it yet.. Its getting delivered today :) Im so excited.

So yer, what has to be removed for the cooler?

Any other hints for installation you may want to share? Im gona give it a chop on the weekend.

I fitted my hybrid to my r32 last weekend the only things i needed to modify were:

1. The fanblades and shroud need to be trimmed for the top pipe to fit.

2. Both top pipe and the cooler bottom brackets were way off so i had to make my own.

3.Had to give my gtr front bar a haircut for that to fit properly too.

Other than that it was all good. Took about 8 hours and 10 beers :) It was the first one i'd done.

Well done Ronin. It took me the same time for my r33.

You car will breath much healthier now. Did you notice much power difference?

123toc

Pls go to the link below to get some picture. Although its for R33 but it will fit a r34.

https://secure-krakatoa.commercevault.com/p...OOLER%20KIT.htm

i put mine on last saturday.. started at 12 finished at 6.. That included playing a few card games and some pizza :)

I can realy notice the difference when i am by myself at night time... it seems to hold boost a lot better now.. from 4500rmp onwards its way better, + i seem to get better fuel consumption, ALSO i cant hear my car missfire anymore.

I didnt have to trim the front bar or anything. I just moved the horns up a bit.

I will post some pics of it later.. looks awesome. Thanks Jet!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...