Jump to content
SAU Community

Screamer Pipe?

R33Gtst Driver

By R33Gtst Driver,
in Australian Capital Territory

 Share

Recommended Posts

R33Gtst Driver Enthusiast

R33Gtst Driver

Posted
  • Author
Posted

Ok so i spoke to a mate of mine who is a mechanic he said that a scremer pipe will increase boost response time because the turbo keeps spooling/spinning somthing about there being no back pressure. can someone confirm/deny this because this would be a performance increase.

i would like to get into drift raceing i just dont have the money but little things like this i can get made up and use them when i start drift raceing and remove them when i wanna drive on the road.

R33Gtst Driver Enthusiast

R33Gtst Driver

Posted
  • Author
Posted (edited)
the effects will be minimal over a decent exhaust with it all plumbed in.

well i have a full 3inch into 4inch cannon from the turbo back would you consider that a decent exhaust?

Edited by R33Gtst Driver
R33Gtst Driver Enthusiast

R33Gtst Driver

Posted
  • Author
Posted
planing on doing it with the stock turbo? if so you will still only get 200kw and 3" will be fine for that and it should still be fine at 300kw.

i have a high flowed t3/t4 turbo already but im planning on geting a g35? turbo i thinks its called i will be makeing 4-500kw or more for now i think thats what my mate is makeing im pretty much just copying what he has got

R33Gtst Driver Enthusiast

R33Gtst Driver

Posted
  • Author
Posted (edited)
no gt35 is going to give you 4-500kw. it is not a turbo capable of that and your engine wont like it either.

yeah im not sure about the name of the turbo im pretty sure my mate said it was a g35 turbo he is using? allthou i cant find any info on it so i probley have got the name of it wrong

Edit: also i ment hp not kw

i think this is the one he has http://www.cimotorsports.net/motor-sport-p...rbocharger.html or something similar. so what the reason my motor wont like it?

Edited by R33Gtst Driver
R33Gtst Driver Enthusiast

R33Gtst Driver

Posted
  • Author
Posted (edited)
The stock engine internals are only so strong, you are asking them to deal with 200kw or more than the factory 187. it may last for years it may last a week.

i thought you were gonna say it wasnt big enough :cool: thanks for the heads up but im aware of the internals factor im not to worried about it thou as im planning to build a stronger motor anyway

i just realised this would be a good place to ask a question so here goes basicly i wanna make 600hp - 1000hp in my skyline with a really good response. the responsiveness is more important to me then the power but i would still like to have a alot of power what turbo and engine mods would you guys suggest? i have been looking at turbos from here http://www.turbobygarrett.com/turbobygarre...ers.html#medium but i cant make my mind up any hlp would be apprecitated

Edited by R33Gtst Driver
R33Gtst Driver Enthusiast

R33Gtst Driver

Posted
  • Author
Posted
at no point should you combine i want 600-1000hp and response is important. its not going to happen. 600hp is getting to the upper limits of a 1.0 rear T04Z and thats not going to be on full boost till 4500-5000 or later.

ok well i dont know much about what im doing wwith upgrades. i just want huge amount of power and a decent spool time i figured big lag and nos shots were required for 7-800hp or more.

whats the to4z hp rated to? as thats sounds good to me and am i better of going for a cutoms turbo like gt35/gt42 or gt45 over a t04z

Duncan1 Rising Star

Duncan1

Posted
Posted
ok well i dont know much about what im doing wwith upgrades. i just want huge amount of power and a decent spool time i figured big lag and nos shots were required for 7-800hp or more.

whats the to4z hp rated to? as thats sounds good to me and am i better of going for a cutoms turbo like gt35/gt42 or gt45 over a t04z

The circuit car that im driving is a 32 v-spec gtr v-spec, fully built engine and drivetrain with a custom t04z external wastgate/screamer pipe.

Puts out 420awkw at 1.5 bar, makes the best sound in the world. I really think you need massive power to make an screamer pipe a worthwhile/credible thing.

I havent fully read your thread, but i cant help but thinking your modifying the wrong car. The to4 on the rb26 has a significant amout of lag, starts pulling from 4300 and then rockets from 5 to 9,000rpm in the blink of an eye!

Wouldnt have much of a rev range without massive cams and strong internals.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...