Jump to content
SAU Community

Recommended Posts

hey everyone I've come to the realization that a skyline is a must and i think it is now time for me to jump back into the drivers seat of a line problem being I've only ever dealt with the older skylines r30's and r31's and don't really know what i should be looking for when sussing out vehicles, what usually goes wrong, where do they rust mostly and any other ifs and butts i need to know when shopping for a 33 any help is muchly appreciated people thanks for ya time and effort in advance

Paul. :) :) ;)

Link to comment
https://www.sau.com.au/forums/topic/287201-looking-at-buyin-33/
Share on other sites

hey everyone I've come to the realization that a skyline is a must and i think it is now time for me to jump back into the drivers seat of a line problem being I've only ever dealt with the older skylines r30's and r31's and don't really know what i should be looking for when sussing out vehicles, what usually goes wrong, where do they rust mostly and any other ifs and butts i need to know when shopping for a 33 any help is muchly appreciated people thanks for ya time and effort in advance

Paul. :):);)

Usual sutff - bushes, paint cracking, interior wear etc. Best to get an RAA mechanic to do the once over if you're not mechanically inclined...

On the other hand, I know RubyRS4 has a 4 door r33 that hes looking to sell once he gets his Stag back on the road - send him a message - private sales are always better deals than import yards or dealerships

-D

Just look for the usual things when buying a car, ie look for signs of abuse smoky turbo, smoky engine ,accidents check all service history, does the miles tally up with the wear and tear of the car etc etc...

Well Paul

I would be looking in the engine bay for wires, make sure they are neat and tidy, nothing has been chopped and rushed in there. Then i would be looking for grease, oil leaks etc, power steering leaks are common on 33's.....make sure it has a reo support bar....do the normal check of lights, washer jets, make sure the Ariel goes up and down....boot latch works, fuel lid opens up properly....take a look in the boot and nothing has been chopped up etc.....look under the car for worn bushes suspension components....

after you have done all of that start it up...take it for a nice drive make sure no wierd noises coming from the engine bay etc......take a look at brake rotors and make sure they are not warped etc....after that it should give you an idea about the car etc etc...

happy hunting

PS i think WLD MAN off here is selling his Black R33....so i would be PMing him first as he has just come off a defect etc.....so the car is relatively stock and regency approved.....

when i bought mine the only things wrong were the susepension was had it (could tell by leaking), also check for missing paint on engine as it can be an indicator that the car has had a hard life. I would also recommend making sure the gearbox is in good condition, try a few 'spirited' changes to make sure everything is smooth and not too crunchy. Most importantly take it for a good drive, to sus out any problems and get it check over by the RAA or someone who is a mechanically minded if you are not. happy hunting.

Edited by 2FST4U.R33

hey cheers for the response guys, i think i'm somewhat mechanically minded was just seeing if there were common things that go wrong in them to keep an extra watchful eye out for, also with the RAA check a bunch of my mates are mechanics so i'll def be getting them to give it a look over take it into their workshop and get it in the air, and dohmar as good as it sounds i think i'd stick with a 2 door got my eye on a couple of cars at the moment.

Thanks guys

Paul.

i'd just look for an R34.
or maybe a magna or a CBR, and hang around a nissan forum like a bad smell

Kzing.....

you can pick up 33's for around 10-13K and 34's for around 13-17K so there is a pretty big price difference....IMHO 33's look better.....

*puts flamesuit on*

no way :blush: , 32's look the best, then 34's and then 33's etc.

me and my mate have been hunting for a 33 for the last month and only just picked one up yesterday. i cant tell you how many shitbox 33's there are out there where people try and bullshit you into thinking their good.

look at the seal panels and chassis rails under the car, if their good then check for leaks. take it for a spin and then check for leaks again. we found that a few 33's would start dripping oil from the rocker cover near the turbo and from near the steering rack was another biggy on quite a few we looked at.

have fun, we did haha

aww no what one did you and ya mate pick up? lol fingers crossed it wasnt one i was looking at lol

no way :blush: , 32's look the best, then 34's and then 33's etc.

me and my mate have been hunting for a 33 for the last month and only just picked one up yesterday. i cant tell you how many shitbox 33's there are out there where people try and bullshit you into thinking their good.

look at the seal panels and chassis rails under the car, if their good then check for leaks. take it for a spin and then check for leaks again. we found that a few 33's would start dripping oil from the rocker cover near the turbo and from near the steering rack was another biggy on quite a few we looked at.

have fun, we did haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...