Jump to content
SAU Community

Recommended Posts

Hey Guys, im new to this blogging thing and dont kno if i did it right.

well pretty much i have a R34 GTT 98 coupe, i have a Garret T28 Ball Bearing Turbo swapped from my cousin for a xbox 360 (he had 2 of them). i am wanting to change my stock turbo to put the T28 in for more response.

some ppl tell me that its a smaller turbo so there will be no high end power, but thats not what i want, i want response from the engine.

can you guys give me some insight of what i need and how to go about it? All he gave me was the turbo and actuator.

ps. also what size is the stock turbo on the r34 gtt? my stock boost gauge works and sometimes doesnt at all, but i still get the bov sound. any ideas?

thanks again and its good to be part of a community.

Link to comment
https://www.sau.com.au/forums/topic/287521-r34-gtt-turbo-help/
Share on other sites

I'd think that you'd need some form of ECU or Piggy Back ECU like a Power FC or S-AFCII to tune the car after the turbo install. Your tuner should then be able to get it to the state you're looking for.

As for the boost gauge issue; sounds like a faulty boost sensor, as it if were a leak then I would suspect it wouldn't work at all.. I've been told it is a common issue with R34 GT-T's.

thanks for the reply R34 Wong, yeh for the ECU side, i am goin to Nistune after the turbo install, but with the T28, do u think im being stupid or is it actually worth it?

i mean the T28 has only done 2000ks, and i dont think i want to spend more money on something that i already have.

if its a common failure, i can no longer blame the gauge, i thought the bastard had a personal vendetta against me.

thanks again

no problems mate. We'll, I guess it all depends on how far you want to take the car. The modification bug is a strong pull...

If you're not looking to go too far, I'd suggest something along the lines of an S-AFCII, as it will allow you to revert your car back to stock and flog it if you intend to down the line.

Also means you can sell the S-AFCII seperately or else transfer it across to your new car.

Good luck with your car mate, and welcome to SAU.

T28 off what?

If the flange is different - forget it. Simply not worth the effort. Overall i still think it's a waste of time/effort/money. If you don't like how responsive a R34 NEO is with a factory turbo, you need to go buy a V8 :P

If you want more response... Keeping the stock turbo

1. Exhaust.

2. Full tune/ECU, adjusting the VCT as well for response if you are that serious

3. Up the boost to 10psi or so

4. Decent flowing panel filter in the stock airbox

It will feel much nicer everywhere from takeoff to the top end. Stock ECU's are filthy.

im not exactly sure but will the stock turbo be ok to handle power? slappin myself if sound silly but would the usage of power snap the nylon part?

coz atm i got the blitz podfilter, turbo back exhaust with high flo cat, fmic. i was goin to get nistune to piggy back the ecu after a turbo upgrade, but if u think otherwise, i will follow suit.

unfortunately i just dont kno as much as i would like to, thanks for the help.

my car is back firin alot, i changed the sparkplugs to platinum, oil change and throttle body clean, maybe tunin the ecu will help?

thanks for the reply

Edited by Fei Jai

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...