Jump to content
SAU Community

Recommended Posts

Erm, ylwgtr2, the GT500 GT-Rs have run a VQ30DETT for a couple of years now...

Just like the GT500 Supras run V8s (a stroked 5.3L 3UZ-FE Lexus mill), as does the HKS Mercedes CLK (a Merc 5.0L).

The GT300 350Z uses an NA VQ35 and revs out to 850rpm (or near there)

Oh, and the Monaro might make 600hp from 427ci, but it's redline is down near 5-6000rpm so it's not spinning like the other cars in the class (Ferrari, Porsche et al)

If you put JGTC up against Nations Cup, there's no way the Aussies would win considering the level of modification the Japs are allowed. Although, if someone was to bring in a Ferrari 575GTC, Chev Corvette C5-R or Lamborghini Murcielargo R-GT it could be a different story.

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Erm, ylwgtr2, the GT500 GT-Rs have run a VQ30DETT for a couple of years now...

Just like the GT500 Supras run V8s (a stroked 5.3L 3UZ-FE Lexus mill), as does the HKS Mercedes CLK (a Merc 5.0L).

The GT300 350Z uses an NA VQ35 and revs out to 850rpm (or near there)

Oh, and the Monaro might make 600hp from 427ci, but it's redline is down near 5-6000rpm so it's not spinning like the other cars in the class (Ferrari, Porsche et al)

If you put JGTC up against Nations Cup, there's no way the Aussies would win considering the level of modification the Japs are allowed. Although, if someone was to bring in a Ferrari 575GTC, Chev Corvette C5-R or Lamborghini Murcielargo R-GT it could be a different story.

these were taken last year...the great man kazuyoshi hoshino holds a toast to his RB26 engine....

Guest INASNT
Oh, and the Monaro might make 600hp from 427ci, but it's redline is down near 5-6000rpm so it's not spinning like the other cars in the class (Ferrari, Porsche et al)

U can make a pushrod 7 litre engine rev more than 6000rpm, if it did rev like the ferraris then it would be scrap metal after a few laps.

I actually don't mind my V8....4 cams, 32 valves, 6 bolt mains and 6500 redline.

Thankyou toyota.

Actually a couple of other manufacturers have been interested in V8SC and were willing to build approx 4 litre 4 cam in one of their 4 door variants. Has all gone quiet as the established brands wanted them heavily limited, given the technological advantage and regardless of the 20% less capacity

sigh, the monaro 427 is completely legitimate. It just has a stroked and bored stock engine, it is not the supercar that holden were planning on making, just a regular monaro with a massiver engine in it. Oddly enough the only thing in that car that is from a monaro is the shell. The race was clearly in favour of the monaros though, the rx7s had to run less than stock boost yet the monaros were able to increase their engine displacement to 7 ltres... bs fair competition

Hi Guys,

The 427 is a Big Block V8, not even close to an LS1, it has a Hollinger 6 speed sequential gearbox, the diff is a Ford 9 inch, the body with roll cage was built by Dencar, the brakes are etc etc There is very little 'Olden in them. Plus the 3 were built by Gary Rogers Motorsport not HRT.

If you want to get into V8dinosaurs, there is more "Ford" in a Commondoor than there is "Holden". The diff is a Ford 9 inch, the gearbox is a H pattern Hollinger 6 speed originally in a Ford Top Loader case, the front suspension is double wishbone (not struts) so they have the same adjustablility as a Ford, the engine has equally spaced inlet ports (copying a Ford) whereas Chevies are siamesed, the rear axle is live (not independant) which Commondoors haven't had for years, the chassis aren't even built by Holden, etc etc.

Someone said the GTR in the JGTC was more Nissan than a V8 Commondoor is Holden, well I agree. At least the GTR has a Nissan engine, the Commondoor has a Chevy with a copy of a Ford cylinder head on it.

A small block is defined by the bore spacing. The LS1's bore spacing is that of a small block so therefore it is a small block. It uses a motorsport block which has thicker walls (anyone remember the thick wall Group A RB26 block)

I guess GTR700 really sucks because of all the non production and modified parts on it.

The race was clearly in favour of the monaros though, the rx7s had to run less than stock boost yet the monaros were able to increase their engine displacement to 7 ltres... bs fair competition
The RX7s run lower boost to compete with WRXs, Evos and HSV GTSs. They are not in the same class as the Monaro...

well, not really, if you want a car built from the ground up to race just grab a formula car, V, ford, f3 etc etc.

Production cars have a couple of advantages tho, available base model, parts, 2 seats to scare the crap out of passengers, and ability to keep costs low

Only if you are expecting sales boosts on the outcome of the racing

"Holden (or Ford) wins!!! See your local dealer for a Bathurst winning Falcodore"

It really is like that here Gojira.

Guest INASNT
Only if you are expecting sales boosts on the outcome of the racing

 

"Holden (or Ford) wins!!! See your local dealer for a Bathurst winning Falcodore"

 

It really is like that here Gojira.

so true, when the cheating monaro won bathurst the holden sales pitch was monaro wins game over, trying to say they can beat porsche,lambo and ferrari.

When the reality is that any production monaro would get its ass kicked by a porsche,;ambo or ferrari in every respect!!!

Does anyone really think that though... Is it just a bogan stereotype?

I certainly don't think the taxi that drops my drunken carcass home on after a Friday night has anything to do with the machines nudging 300km/h down Conrod Straight.

What about Supertourers, did people like them? I mean they were pure racing cars, billet suspension arms mounted about 15cm from the original point, tubbed more than any drag car you have ever seen, sequential gearboxes and funky diffs, 19" wheels back when 18" was still considered massive... They really had nothing to do with the cars they were based on...

Supertouring wasn't my favourite racing.

And Duncan, I can't fit my bargearse comfortably in a GTR34 seat let alone a formula anymore.......and you race....so you know that inexpensive is a relative term...especially with no sponsorship.

Not sure what I'm trying to say here though....is it time for beer yet?

Mmmm beer, now that is something we can all enjoy.

I found an GTR34 a bit squeezy too... Not good... Too much good living.

If only they would get on and make an R35 GT-R so we can have a proper argument when PROCAR hobbles it to let the Monaro win :)

I enjoy the V8 Supercar series, but I would prefer some variety of vehicles in a highly tuned state. I hear that Toyota were considering entering this competition. Probably some way off yet if it ever happens.

I think that the Holden 427 should never have been able to race in the Bathurst 24hr. Who is going to beat that car? Not one of those things has been on sale to the public. I sure the government were involved somewhere along the lines of that decision.

Politics + Sport = Ghey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...