Jump to content
SAU Community

Croydon's Do It Again!

White 35

By White 35,
in R35 GTR

 Share

Recommended Posts

White 35 Enthusiast

White 35

Posted
Posted

Jim at Croydon's has done it again!!!

Ive been watching everyone tune their cars locally and in the USA for about 6 mths now. I didnt rush these mods and originally I was going with a base Cobb map 1 tune to match my midpipe etc but after watching 09GTR work with Croydons the custom tune is the only way to go.

Aside from the car obviously being more powerful its the perfect torque curve that makes the car more exciting to drive. VDC must be to R mode under full power otherwise TC cuts the throttle.

So the mods are:

CBRD Midpipe (the best midpipe ive ever heard - zero drone and under throttle sounds unreal)

Mines filters and

Custom Cobb tune from Jim

Standard the car put out 295kw. But now the car is putting out an easy 340kw (i think 15 pound boost) at the wheels, there is more power to come from these mods above but we backed it off until we can get some better HKS plugs.

Tonight the car ran 3.3 sec to 100kmph with over half tank of fuel. Didnt get it off the line perfectly but 3.3 is good enough for now and this should translate into low 11's. And the car has only 1600kms on the clock.

Next up - Actuators, HKS Boost controller, high flowed catted turbo pipes, GFB Blow off valves and Endless MX72 Pads all from Croydon's.

Highly recommend you speak to Jim at Croydon's if your thinking about some simple mods.

Link to comment
https://www.sau.com.au/forums/topic/287983-croydons-do-it-again/
Share on other sites
09GTR Collaborator

09GTR

Posted
Posted
Jim at Croydon's has done it again!!!

Ive been watching everyone tune their cars locally and in the USA for about 6 mths now. I didnt rush these mods and originally I was going with a base Cobb map 1 tune to match my midpipe etc but after watching 09GTR work with Croydons the custom tune is the only way to go.

Aside from the car obviously being more powerful its the perfect torque curve that makes the car more exciting to drive. VDC must be to R mode under full power otherwise TC cuts the throttle.

So the mods are:

CBRD Midpipe (the best midpipe ive ever heard - zero drone and under throttle sounds unreal)

Mines filters and

Custom Cobb tune from Jim

Standard the car put out 295kw. But now the car is putting out an easy 340kw (i think 15 pound boost) at the wheels, there is more power to come from these mods above but we backed it off until we can get some better HKS plugs.

Tonight the car ran 3.3 sec to 100kmph with over half tank of fuel. Didnt get it off the line perfectly but 3.3 is good enough for now and this should translate into low 11's. And the car has only 1600kms on the clock.

Next up - Actuators, HKS Boost controller, high flowed catted turbo pipes, GFB Blow off valves and Endless MX72 Pads all from Croydon's.

Highly recommend you speak to Jim at Croydon's if your thinking about some simple mods.

Geez, CRD must be good to make you go fast White 35!

  • 3 weeks later...
White 35 Enthusiast

White 35

Posted
  • Author
Posted
Thats awesome for such a few simple mods, must be very happy man.

yeah its certainly a lot more exciting to drive. the car only has 2600kmson it and as the kms go up i think its getting faster. only negative is that it comes on boost so hard at 3-5500rpms and then boost falls away slightly. im going to work with Croydons trying some new Cobb tuning to see if we cant get more consistent boost to the redline. The car is a complete handful in damp conditions and just spins the wheels in 1st & 2nd gear.

Maybe have to do Boost Controller and Actuators etc.

handbrake Veteran

handbrake

Posted
Posted
Just ordered Stillen Sway bars from Forged Performance in the US and H&R Wheel Spacer kit from Perrin Performance in the US.

I'll have them installed in a few weeks and report back the handling changes.

Plus i want a set of these rims!!

Volk Racing Hi metal bronze RE30 19X10 +30 and 19X11 +20 or +25

Hoosiers 295/30/19 front and 315/30/19 rear.

$4190 shipped to Australia, maybe better if group buy

Sharif at forged performance, about to get some for myself, aussie dollar now better than when I was first considering this.

White 35 Enthusiast

White 35

Posted
  • Author
Posted
Volk Racing Hi metal bronze RE30 19X10 +30 and 19X11 +20 or +25

Hoosiers 295/30/19 front and 315/30/19 rear.

$4190 shipped to Australia, maybe better if group buy

Sharif at forged performance, about to get some for myself, aussie dollar now better than when I was first considering this.

yeah im still giving thses rims some serious thought - although the Zele rims are sick as well... i recon the $$ will get a bit stronger as well - before it comes crashing down again! great time to be ordering from the US.

Marko R1 Grand Master

Marko R1

Posted
Posted
Jim at Croydon's has done it again!!!

Highly recommend you speak to Jim at Croydon's if your thinking about some simple mods.

i dont drive a 35 but plan to buy one in the future - as for jim @ crd...u got that right :(

ive taken both my gtr's to jim & nobody comes close (ive been around to 'other' tuners & it has always been chalk & cheese)

R32 Stuart Community Regular

R32 Stuart

Posted
Posted
i dont drive a 35 but plan to buy one in the future - as for jim @ crd...u got that right :blink:

ive taken both my gtr's to jim & nobody comes close (ive been around to 'other' tuners & it has always been chalk & cheese)

:happy: Spot on Marko R1 - Jim know's his Nissan's Our R33 - 2 records - OP South - 46.81 and EC - 1.44.19 still on 20psi, can't wait till finished set-up!!

Marko R1 Grand Master

Marko R1

Posted
Posted
:) Spot on Marko R1 - Jim know's his Nissan's Our R33 - 2 records - OP South - 46.81 and EC - 1.44.19 still on 20psi, can't wait till finished set-up!!

i remember the last time we discussed your lap times, low 40s at EC is a fantastic time :happy:, u were running 300awkw if my memory serves me right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      R32 Nostalgia

      By niZmO_Man · Posted

      From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • niZmO_Man
      New R32 owner soon

      By niZmO_Man · Posted

      Remember this is 1988 tech.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan · Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • Duncan
      Oil pan for RB25DET NEO Stagea "version"

      By Duncan · Posted

      meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
×
×
  • Create New...