Jump to content
SAU Community

Recommended Posts

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

2k... ur dreaming, you can setup a "good" gaming machine for a teenager maybe and keep updating it every few months, which is fine if thats what your happy with. That should perform pretty much to the same level of a PS3 or 360.

But for people who have money and want to pay for it, then 2k will barely cover the CPU and case. The one i built for my mate has these core components... not including the water cooling which is only a wank if you dont overclock.

Intel Core i7 975

EVGA X58 SLI Classified Hydro Copper

6GB Corsair Dominator GT PC3 2000 C8 DDR3

EVGA GeForce GTX-295 CO-OP FTW Edition

All that alone came to almost 4k

And this still isnt going to extremes, he does want to double the GFX cards and double the RAM...

I'll stick to my $300-$500 consoles.

Does he plan on playing games on dual HD monitors with (AA & AF set to max)? Otherwise seems a complete waste of money & seems just for bragging rights. Especially with the CPU, whats the point of getting a $1k+ CPU that won't really help much in terms of gaming anyway (unless his planning on using the 975 raw processing power, which isn't gaming anyway).

& I hope his doing some serious OC, otherwise waste $ on ram & CPU (seeing how the 975 should have the unlocked multiplier.

Way to rip your friend off.

i7 920 D0 will go over 4GHz the 975 is a waste.

Classified + EK Full cover is cheaper than the Hydro that isn't full cover.

Despite owning that RAM myself I'll freely admit it is a complete wank and not worth the price.

Any single PCB GTX 295 will clock as fast if not faster than the CO-OP FTW. Older dual PCB are slightly faster again in most cases and then two GTX 275s are faster again.

If you are going to compare brand new hardware you'd at least have to say $600-$1200 consoles that they sold for when they actually had new hardware.

+1

Seems to me, he or his friend just spend $6k on a computer for bragging rights, unless they are gaming on multiple HD monitors & plan to set max AA & AF (also pointless seeing how aliasing becomes less evident with high resolution)... even then, I would rather spend the $$$ on another graphics card rather than a $1k CPU.

a patch 4 ps3 was out today

good game, took me about a day and a half to finish

but 1 thing i dont like is using my G25 with clutch and using it it manual mode with clutch active but the game still automaticly still engages clutch, not cool

other than that not as good as grid but its ok

I just bought this game and I'm wondering if its a lemon. Yes the graphics/sounds are awesome, and I dont mind the handling and physics, its not as good as some of the other games but its a big improvement on previous NFS titles. I am thinking that EA forgot to test this game at all for bugs and glitches though becuase there seem to be an alful lot of them. My 34 GTR that I just spent all my ingame credits on is immune to part upgrades (like I can buy them and apply them but they dont do anything) and the drifting is absolute shit. It is so shit not even the game its self can handle the shittiness of drift. 7/10 times when the drift event begins with a rolling start the computer will lose it, so instead of starting at 60kmph or w/e I start backwards up against a side barrier. This is all after 1 day of gameplay so god knows what else I'll find or if I'll even be able to make it to the end of the game. I have also heard of some pretty bad ommisions such as the mouse not working on PC version and the XBOX version trying to connect to the playstation store online.

i like it, took me a little while to get used to the way it drives.....then i realised its all in how you setup the driving options....

If you want arcade, leave it all on idiot mode and thrash the hell out of it.

If you like a simulator, put it all on hard as hard, and it drives fantastic.

thats what i love about this game, it can drive like both.

and OMG the Veyron around the nurenburg ring!!!!!! (not gonna check the spelling)

but i dont like the drift mode, i just cant get the hang of it. dunno if its the physics or just me. i loved the idiot proof drifting in pro street, although the rest of the game was a little average.

Edited by boiracer

i downloaded the demo, the game seems to be pretty good, might take a little getting used to, but all in all looks pretty promising, i really want a G25, but cant see myself spending the few hundred on it when i would rather put that money into my real car :), needa hit someone up for a present!

havnt played for like 2 and a half weeks..

last time i was playing. had a worx converted R35 GTR, a stock R35 GTR Spec-V, a stock R34 GTR(used to be worx converted with the 1991 winfield R32 GTR livery but sold it to fund the R35) also an old school GTR. great fun to drive

I got this on PC with momo wheel..havnt played for a couple of days.. but awesome game nonetheless

whats everyone's fastest Nordschliefe times ?

Ive spent hours fine tuning dampers and suspension and the rest of it With the Pagani Zonda R.

Best time is 6:40 can go faster I think.

ive been playing this alot the last few days, and it iritating me more and more each time, drift is now easy. But some of the cars bounce around far to much, the worst of which are in the invitational events, the DB9 at london and the carrera GT around spa. the carrera is near impossible to get to even the first corner without it bouncing around like crazy and while bouncing it doesnt stop or steer. sure these cars are supposed to be hard cars, but that is just stupid, im sure Porsche wouldnt make a car that starts pivoting around bouncing on all 4 wheels before you even turn the wheel...let alot on a beautiful track like spa.

In other events its easy enough to fix as you can actually tune the cars to some degree but in these invitational events you cant do anything.

anyone else had this issue?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No. GKTech arms have spherical bearings in them. No bushes. You will not need bushes for those arms. The sphericals are a bit of a maintenance nightmare. I have replaced all of mine several times in the 5 or so years I've had them, and I have the arms out regularly to clean and lube the balls. Worth the pain on an R32, because the standard arm design is trash. If you need the camber adjustment, there are other options (than the GKTech ones), although I would still lean towards and prefer the GKTech ones, even with the maintenance load of the sphericals. The caster adjustment is also highly valuable, allowing for setting the car up to drive straight. There are a million options for these, including the GKTech ones. I've had Tein rods on mine for 20 years and the balls are much less trouble in that location. Never given me a moment's pain. All positives, no negatives. I consider them compulsory.
    • Lol yeah I ordered the clips mentioned and as far as the amayama diagrams go i think thats all I'll need. Fogured id ask, sometimes people's first hand experience doesnt always match up to diagrams haha, i guess I'll wing it and worse comes to worse I'll just deal with it as I go
    • Thanks for all that information I appreciate it. To answer your questions: - Yep that's what I mean. These guys are professional painters to so I must be missing something. It's a bit hard to explain. - With the primer landing on clearcoat, I make sure that the surrounding clearcoat is scuffed to 240 grit as my epoxy primer says that I only need to sand the area to 240 grit. - Yeah so similar to the first question, assuming that the paint landed on the unscuffed clearcoat because I've seen that happen. - Yep I want to prep the surface in that order. Only reason because epoxy primer will protect it from rust and I need that atm with this crappy Sydney weather. I think I was worried about time, if I try to put the filler down but screw it up somehow and I don't have time to sand it off and reapply it then need to put primer later that it might start to rust again so I wanted to apply the primer as quick as possible to not deal with rust.  - I just deleted some answers, I just realised after watching a video and what you said about looking at the data sheet, that I need to read the data sheet on the specific filler I'm using. It's possible now that I put epoxy primer first was a waste of time and need to go to bare metal lol
    • I did. I went to a suspension guy and he told me because I don't have adjustable camber arms it's the reason why my car veers towards the left if I take my hands off the wheel but if I drive my other every day car and take my hands off the steering wheel it goes completely straight. I think it's common with Skyline's. In order to fix the problem, I likely need gktech camber arms then nismo bushes since I have poly bushes atm, then a wheel alignment after that. With my car if I take my hands off the steering wheel on a really bumpy road before stopping at a light I have to hold my steering wheel somewhat tight otherwise my car will legit just go completely in the other direction quite quickly and I'll slam into something lol instead of stopping straight. I Believe this YouTuber had the same issue and fixed it with gktech arms. At timestmap 6:05 he talks about how the car doesn't veer anymore after installing these arms.  
    • hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
×
×
  • Create New...