Jump to content
SAU Community

Recommended Posts

Hey hey...

Soo... I got defected for my window not working and lack of front indicators (because they were ripped off when I broke my front bar) Anyway... It is a minor notice and I have now installed new indicators and a new window regulator so both defects have been repaired...

But I am not sure if I need a partial or full inspection to clear the defects... Also I was not defected for my front bar being zip tied together, will they pass it when I go to get my clearance or will I have to put my new one on beforehand in order to get my little issues cleared...

I have never had a defect before so I have NO idea what I am doing... It needs to be cleared by Tuesday after next....

Also, where should I go to get it cleared (I have NSW rego)

Cheers...

Melly :blush::P

Link to comment
https://www.sau.com.au/forums/topic/289356-defect-clearance/
Share on other sites

Melly, were you defected in Canberra or NSW? If it was a NSW defect notice, it will have a tickbox down the bottom stating whether it requires a full 'AUVIS' inspection or just a defect clearance inspection. The full 'AUVIS' inspection is pretty much a blue slip.

the inspector did note the underbody of my car had a plethora of cable ties, and didn't like my cable tied grill. But I didn't get defected for it or written up for it at the inspection. Just told I should tidy it up. this is canberra though

Melly bring it to my work ... - Rusden Motors 22 lyell st Fyshwick and I will go over the car and get it sorted since it is only a minor defect we do NSW rego only

Edited by hr32gts
Melly bring it to my work ... - Rusden Motors 22 lyell st Fyshwick and I will go over the car and get it sorted since it is only a minor defect we do NSW rego only

Oooh really??

Excited much :banana:

sfrizza: I was given the defect here in ACT but my car is registered at my NSW address.... It was printed off the little hand held thing...

perfect clearance, exhaust isn't very loud at all, tyres have about 6000kms on em, and the only oil leak(s) it has are rocker cover gaskets weeping, which it's going into Autotech on the 6th to get fixed. Problem is the tint is bloody dark, which I don't much like myself anyway (came on the car). It's not so much that it restricts light getting through, it's just reflective in the dark :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...