Jump to content
SAU Community

Recommended Posts

Stripping down an R32 GTST full car, looking for quick funds for a new shell!

RB20DET - 119,000km's

Has no problems, serviced regularaly, ran fine.

Comes with alternator, coilpacks, ignitor, loom, most other things. Engine is just missing a turbo. Have a lot of other stuff if anything is missing which can be included in sale, just ask.

Sorry i dont know the compression figures.

$900 ono/neg

RB20DET Gearbox

Has no issues, no random noises. Has a really short short shifter on it, most ppl dont like it may need to use a stock shifter.

$450 ono/neg

**Engine + Gearbox combo = $1,300**

Cusco 1.5way diff

Pretty sure brand is Cusco, can remove rear cover for buyer to inspect. in good condition, ive drifted with it before has no issues holding good angle etc etc.

$700 ono/neg

Super Advan Racing Wheels

17x8 +30, 17x9 +38. Come with Kumo tyres well above RWC tread.

In reasonable condition, a few wheels have the red coating on the dish peeling off in some places but other than that they are good.

I will have to double check these offsets but im pretty sure i am very close. Will post up some decent pics and tyre specs tomorrow.

$1,700 ono/neg

Greddy Emanage Blue

Not too sure what looms etc it has, will check this out tomorrow and report back with pics.

$350 ono/neg

Heaps more stuff available, pm with what your after. Thread update tomorrow with pics.

Located in Vic SE Subs (Frankston)

Cheers guys

Stripping down an R32 GTST full car, looking for quick funds for a new shell!

RB20DET - 119,000km's

Has no problems, serviced regularaly, ran fine.

Comes with alternator, coilpacks, ignitor, loom, most other things. Engine is just missing a turbo. Have a lot of other stuff if anything is missing which can be included in sale, just ask.

Sorry i dont know the compression figures.

$900 ono/neg

RB20DET Gearbox

Has no issues, no random noises. Has a really short short shifter on it, most ppl dont like it may need to use a stock shifter.

$450 ono/neg

**Engine + Gearbox combo = $1,300**

Cusco 1.5way diff

Pretty sure brand is Cusco, can remove rear cover for buyer to inspect. in good condition, ive drifted with it before has no issues holding good angle etc etc.

$700 ono/neg

Super Advan Racing Wheels

17x8 +30, 17x9 +38. Come with Kumo tyres well above RWC tread.

In reasonable condition, a few wheels have the red coating on the dish peeling off in some places but other than that they are good.

I will have to double check these offsets but im pretty sure i am very close. Will post up some decent pics and tyre specs tomorrow.

$1,700 ono/neg

Greddy Emanage Blue

Not too sure what looms etc it has, will check this out tomorrow and report back with pics.

$350 ono/neg

Heaps more stuff available, pm with what your after. Thread update tomorrow with pics.

Located in Vic SE Subs (Frankston)

Cheers guys

do you have all the software etc for the e-manage?with loom and instructions to fit etc? freight cost to tas 7250 please?

thanks :cool:

Side Skirts (Type M / Aftermarket?)

These are in really good condition, no cracks or anything. Not sure whether they are genuine Type M or aftermarket. Poor picture of passenger side, will remove for genuine buyer.

$250 ono/neg

post-22402-1253861281_thumb.jpg post-22402-1253861305_thumb.jpg

Trust Wastegate Type-S

Reasonable condition, was working well when it was on the car had no issues holding boost. According to Greddy site spring should be 0.8bar.

$400 ono/neg

post-22402-1253861199_thumb.jpg post-22402-1253861250_thumb.jpg

X-Force Stainless Steel Manifold

High mount, T3/T4 flange? Not too sure. See pics.

$350 ono/neg

post-22402-1253860992_thumb.jpg post-22402-1253861026_thumb.jpg

Greddy Emanage Blue

Comes with N-4 Plug and Play loom suited for: (taken from NENGUN)

Skyline - R33 GTS-t S1 - ECR33

Skyline - R32 GTR - BNR32

Skyline - R33 GTR - BCNR33

Skyline - R34 GTR - BNR34

Skyline - R32 GTS-t - HCR32

Cefiro - A31

Trust Part#: 15920904

No software included, don’t have it.

$450 ono/neg

post-22402-1253861070_thumb.jpg

Diff is SOLD guys.

New parts:

Front Cusco Strut Brace - $100

post-22402-1253950996_thumb.jpg

Type M Front Bar (Plastic) - $100

Some damage from drivers side impact as seen in pic. Not too bad should be fixable, no bits missing.

post-22402-1253951114_thumb.jpg post-22402-1253951211_thumb.jpg

post-22402-1253951247_thumb.jpg

Still got a whole cars worth of parts, anything anyone wants just ask me!

Cheers

Super Advan Racing Wheels

17x8 +30, 17x9 +38. Come with Kumo tyres well above RWC tread.

In reasonable condition, a few wheels have the red coating on the dish peeling off in some places but other than that they are good.

I will have to double check these offsets but im pretty sure i am very close. Will post up some decent pics and tyre specs tomorrow.

$1,700 ono/neg

These are worth a lot less than that mate. I sold a set for about half of what you're asking recently. Might even be this pair actually coz they had the anodised rim and had a bit of peeling.

You'll probably find the 17x8's are +35 offset.

Stripping down an R32 GTST full car, looking for quick funds for a new shell!

RB20DET - 119,000km's

Has no problems, serviced regularaly, ran fine.

Comes with alternator, coilpacks, ignitor, loom, most other things. Engine is just missing a turbo. Have a lot of other stuff if anything is missing which can be included in sale, just ask.

Sorry i dont know the compression figures.

$500 ono/neg

RB20DET Gearbox

Has no issues, no random noises. Has a really short short shifter on it, most ppl dont like it may need to use a stock shifter.

$450 ono/neg

**Engine + Gearbox combo = $900**

Super Advan Racing Wheels

17x8 +30, 17x9 +38. Come with Kumo tyres well above RWC tread.

In reasonable condition, a few wheels have the red coating on the dish peeling off in some places but other than that they are good.

I will have to double check these offsets but im pretty sure i am very close. Will post up some decent pics and tyre specs tomorrow.

$1,100 ono/neg

Heaps more stuff available, pm with what your after. Thread update tomorrow with pics.

Located in Vic SE Subs (Frankston)

Cheers guys

Prices updated accordingly. Anyone is free to make offers..

  • 1 month later...
Stripping down an R32 GTST full car, looking for quick funds for a new shell!

RB20DET - 119,000km's

Has no problems, serviced regularaly, ran fine.

Comes with alternator, coilpacks, ignitor, loom, most other things. Engine is just missing a turbo. Have a lot of other stuff if anything is missing which can be included in sale, just ask.

Sorry i dont know the compression figures.

$900 ono/neg

RB20DET Gearbox

Has no issues, no random noises. Has a really short short shifter on it, most ppl dont like it may need to use a stock shifter.

$450 ono/neg

**Engine + Gearbox combo = $1,300**

Cusco 1.5way diff

Pretty sure brand is Cusco, can remove rear cover for buyer to inspect. in good condition, ive drifted with it before has no issues holding good angle etc etc.

$700 ono/neg

Super Advan Racing Wheels

17x8 +30, 17x9 +38. Come with Kumo tyres well above RWC tread.

In reasonable condition, a few wheels have the red coating on the dish peeling off in some places but other than that they are good.

I will have to double check these offsets but im pretty sure i am very close. Will post up some decent pics and tyre specs tomorrow.

$1,700 ono/neg

Greddy Emanage Blue

Not too sure what looms etc it has, will check this out tomorrow and report back with pics.

$350 ono/neg

Heaps more stuff available, pm with what your after. Thread update tomorrow with pics.

Located in Vic SE Subs (Frankston)

Cheers guys

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,can u text me 0433601278 , want emanage ,, i am in boronia ,,,97589590

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...