Jump to content
SAU Community

Recommended Posts

Hi! I got a R34 GT sedan.

Im not sure what suspension i got but i think its stock.

Here is the ride height:

cimg1189.jpg

Seems lower than stock R34 though.

Anyways, the car rides fine with good handling but its a bit rough when using it as a daily ride.

Especially if i go over train tracks and un-even paved roads. Very Very Bumpy

I had my mechanic inspect my suspension and he said its fine and theres no faults.

So i was wondering if i can do anything to keep that ride height and make it more comfortable?

Thanks People

Your shocks are probably shot, and you may also be hitting the bump stops.

Get some new shocks - Bilstein, KYB, Koni - which should give you back a bit of comfort.

Also, what size tyres are you running?

Im running 235/45 Z R17 atm.
Those should have enough sidewall flex.
How much does a 4 new shock absorbers cost?
A set of Bilsteins or Konis might set you back around $1G, KYBs are probably a bit less.

For Bilsteins, talk to Quadrant Suspensions in Berwick. For Konis, talk to ToPerformance in Vermont South.

Best bet is bilsteins... new springs wouldn't hurt... could get some new standard spec ones, or some tein S tech or similar.

Quadrant in Berwick supply other suspension joints, 1300 for the shocks supplied and fitted and aligned is reasonable. Also try traction in rowville, they are always fair on price. Centreline arent and i dont rate their work.

Hi everyone, Thanks for all the replys.

My mechanic said its stock suspension.

He said i can upgrade to some coilovers or new shock absorbers.

atm, i want coilovers but need the $$$$$$$$

i guess ill save up for them and see how i go. Thanks people

Hi everyone, Thanks for all the replys.

My mechanic said its stock suspension.

He said i can upgrade to some coilovers or new shock absorbers.

atm, i want coilovers but need the $$$$$$$$

i guess ill save up for them and see how i go. Thanks people

coilovers will be harsh ride, especially cheapys

bilsteins wont be

I had bilsteins on my old R32GTS4. Hardest suspension I ever had - no give whatsoever. You could just make it move up and down if you pushed the boot hard enough....

Bu by god, it loved the corners!

Edited by Ten Four
I had bilsteins on my old R32GTS4. Hardest suspension I ever had - no give whatsoever. You could just make it move up and down if you pushed the boot hard enough....

Bu by god, it loved the corners!

what springs(rates) were in with it? were they off the shelf valving too?

Hi all. I was just searching, and atm looking for a cheaper option.

I came across Tein S.TECH Springs and Tein H.TECH springs.

Would these give me a more comfortable ride? but i think these will drop my ride height which i dont want to do because with my current height, i get my front bumper scrap at some places, therefore dont want to go any lower.

Any clue? ne1?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be determined, Luke, to be determined. 😁 Definitely the car
    • It might be worth having a good look at the chassis behind the bumper then; most people prefer the series 2 look so it might have been changed to cheaper parts as part of an earlier repair
    • The car itself a series 2. I was just curious about the headlights and just wanted to confirm that they were series 1. Good to know the rest of the front end is series 1. It’ll be easier for me to find parts on the aftermarket side of things lol
    • If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
×
×
  • Create New...