Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wondering if anyone has some coilpacks i could borrow to test out if my problem is indeed my coilpacks.

It's a series 1.5 so I would be looking for series 2 coilpacks, and if it is my coilpacks i'll go out and buy some splitfires.

I just want to avoid buying them if i don't need them.

I'm in the camberwell, ashburton area and would only need them for a night.

Thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/
Share on other sites

ah damn i threw my coil packs for my seris two last week lol.

easy fix for you to test your coil packs is gake em out. give it a good clean and hit it with a thick coat of clear nail polish or some kind of silicon sealant. that will patch up any cracks your have on your coil packs as a temp fix and prrevent arking. if that fixes your problem then your coil packs are faulty

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4856370
Share on other sites

What is the problem?

usually to diagnose you simply unplug each one @ idle. If the idle does not change, that is the dead pack as it should change if you unplug a good one :thumbsup:

Or you talking slight miss under load type of thing?

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4856460
Share on other sites

I probably should've explained myself a little better.

I have another thread with an outline of the problem here http://www.skylinesaustralia.com/forums/Ca...29#entry4803129

Basically the car wont start and i've checked a lot of stuff. I think it's actually the ignition module inside the coil pack as apose to a crack in the coil pack.

When i tested it it would get an intimitant spark but was not very strong. Also the car would just about fire but not quite.

So i pretty much jsut want to see what happens when i just some new coil packs in with fresh ignition modules and hopefully that will solve it..

Thanks for any help guys.

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4856938
Share on other sites

No problems Paul thanks for the input.

I just wanted to make sure i wasn't barking up the wrong tree.

If anyone has some i can borrow... literally for 30 mins or so i would greatly appreciate it.

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4857346
Share on other sites

Will either of you guys be around during the day today?

and how soon wold you need them back.

I could probably do a late night drop back.

I i'm Glen Iris, so camberwell, ashburton area where are you guys?

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4857795
Share on other sites

Also pull your Coil Pack harness out and check it for any splits, mine had a few splits in it which was causing it to die under load at random times. Pulled the harness out and grabbed the Nitto and taped the whole harness. This fixed the issue instantly. Also check out teh eart on your battery, may be lose or shitty cable.

Link to comment
https://www.sau.com.au/forums/topic/290177-coilpakcs/#findComment-4871627
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...