Jump to content
SAU Community

Recommended Posts

Hey y'all! :)

Just wanted to share what I've done to my stagea

Basically just bought an infiniti G35 2003 model Stereo CD center console with navigation + DVD player and fitted it to my stagea.

Apart form that I changed LEDs to red, just something for myself.

post-65692-1254388614_thumb.jpg

post-65692-1254388673_thumb.jpg

post-65692-1254388746_thumb.jpg

post-65692-1254388808_thumb.jpg

post-65692-1254388888_thumb.jpg

Hey y'all! :)

Just wanted to share what I've done to my stagea

Basically just bought an infiniti G35 2003 model Stereo CD center console with navigation + DVD player and fitted it to my stagea.

Apart form that I changed LEDs to red, just something for myself.

post-65692-1254388614_thumb.jpg

post-65692-1254388673_thumb.jpg

post-65692-1254388746_thumb.jpg

post-65692-1254388808_thumb.jpg

post-65692-1254388888_thumb.jpg

Cool, so the G35 is obviously quite compatible, since you are viewing fuel usage info etc. I thought you had to re-chip the stereo... nice

needs modification? or straight fit? with all the navi working fine?

will i be able to get maps put on this unit? or same story again with no car in australia with the australian maps that will load on this unit?

needs modification? or straight fit? with all the navi working fine?

will i be able to get maps put on this unit? or same story again with no car in australia with the australian maps that will load on this unit?

same question..

i thought US goes by Miles not km's?

did you converit it over?

Basically just bought an infiniti G35 2003 model Stereo CD center console with navigation + DVD player and fitted it to my stagea.

whats so hard about it. he had a navi car to begin with and bolted the USDM gear into it. the cruise unit came from me.

I wasn't :cool:

if you can put a band expander into it then you are pretty much done. out with one section and in with the other. the navi unit plugs in. there are a few spare leads left over from the TV side of things but thats it. the LED's - pass. too many and way too fiddly for the average punter.

only minor downer is the lack of AM. FM is useable.

chipping the radio was something I was working on and I cannot get the thing to stop drifting off the station..

Edited by Chris Rogers
still the same issue. no maps.

Aren't the US and JAP navi systems different though?

I thought that the Japan system is a Xanavi... not sure about the US system, but maybe something over here uses the same type of navi? Toyota maybe??

similar chassis though it runs a different software mapping engine to anything here.

vlad's idea fixed the most common bugbears of these cars. he did lose the TV option though. (I'm assuming he had it in the first place.)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...