Jump to content
SAU Community

Rb26 & Defi Guages & Turbosmart Bov

burko1
 Share

Recommended Posts

burko1 Veteran

burko1

Posted
Posted (edited)

Up for grabs is a built rb26 , it's got cp pistons and standard rods. was used for 6 months on standard computer

it has a arp stud kit and has the sump modified for rwd , it is welded up properly!

comes with wiring harness , computer , injectors and is a complete engine ready to drop in.

Has been on the engine stand in the garage for about 12 months , and has been turned over frequently.

It has polished rocker covers and a painted coil cover.

Comes with standard turbo's too.

Quick sale $2500 no offers!

pics comming . in fairfield thats nsw, inspections welcome.

Also 3 defi guages module and sensors , that is oil temp and pressure and exhaust temp , used but in as new condition , yet again been sitting around for a while , asking less than half what i paid , $500 no offers.

Turbo smart bov v port , brand new never used quick sale $180

pm for more details

Edited by burko1
Link to comment
https://www.sau.com.au/forums/topic/290669-rb26-defi-guages-turbosmart-bov/
Share on other sites
Scotty_ecr-33 Contributor

Scotty_ecr-33

Posted
Posted

hey champ very interested in then engine, would you do freight to vic? at my expence of cause, this would bolt straight up to 33 gtst wouldnt it, im no wiz with this shit yet i have recently done bottom end in mine and wish to upgrade engine! cheerz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...