Jump to content
SAU Community

R34 Gtr-clutch

042goxyr33
 Share

Recommended Posts

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
My last two clutches were Jim Berry Race clutch and an Xtreme. Both twin plates. Neither have missed a beat.

+1

Twin plate sounds like the plan, I use to have a HKS twin plate, great for the higher RPM lunches and plenty of grip.

street use some times on track

now is got 230kw planing to go up to 360kw

A single extra heavy duty clutch plate should hold up fine for 230 kW's, all the way to just over 300 kW's IMO, I drove a V-Spec II Nur with 306 kW's at the rears and the single is holding up fine.

Any Japanese brand should do you fine, eg. HKS, OS Giken etc.

I think you be pushing it with a single when getting up to 360 kW's... Again, HKS, OS Giken should do you fine for the twin plates.

Link to comment
https://www.sau.com.au/forums/topic/291399-r34-gtr-clutch/#findComment-4874401
Share on other sites
  • 3 weeks later...
Johnny Veteran

Johnny

Posted
Posted

definitely twin plate, i have the nismo coppermix and its great; grips nicely, dosent slip but is still nice and light for street use, none of the on-off jerkyness unless you get the friction point just right e.g. jim berry full monty clutch i tried to drive on my mates r34 - couldnt do it lolz

i was able to teach myself manual with the coppermix, without difficulty - i will use nothing but in future.

Link to comment
https://www.sau.com.au/forums/topic/291399-r34-gtr-clutch/#findComment-4907677
Share on other sites
(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
so twin plate

go for it I gess

also what pice range I am looking them?

NISMO SUPER COPPERMIX - TWIN PLATE CLUTCH

Product # 3002B-RSR48 - Nissan - Skyline BNR34 - RB26DETT - $2,098.02 AUS

- http://www.nengun.com/nismo/super-coppermi...in-plate-clutch

Link to comment
https://www.sau.com.au/forums/topic/291399-r34-gtr-clutch/#findComment-4908843
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...