Jump to content
SAU Community

Recommended Posts

When people say 'stock', i think they are just emphasising the fact that no extra load has been put on the engine. ie. no boost controllers and cams adjustments and blah blah blah.

Exhaust should actually take a load off your engine (but in turn, it runs better so you give it more to compensate hehe)

When I had my R32 which had a stock exhaust system (but pod filter) I played with the boost. I tried to measure reasonably accurately the effects (0-100, some 400m runs etc) and the fastest it was happy at while keeping temps reasonable was about 0.8 bar so about 11psi. More boost actually started to go backwards. I stuffed up once and let it goto 1.1bar, it was slow as thou I didn't hear it detonate suprisingly.

As for my current R33, as per Rev210 ditch the two step its crap... or for a free mod just wire it so its always on asa temporary solution...

When I had my R32 which had a stock exhaust system (but pod filter) I played with the boost.  I tried to measure reasonably accurately the effects (0-100, some 400m runs etc) and the fastest it was happy at while keeping temps reasonable was about 0.8 bar so about 11psi.  More boost actually started to go backwards.  I stuffed up once and let it goto 1.1bar, it was slow as thou I didn't hear it detonate suprisingly.  

As for my current R33, as per Rev210 ditch the two step its crap... or for a free mod just wire it so its always on asa  temporary solution...

what do you mean by, "for a free mod just wire it so its always on asa temporary solution.." ?

as in just a standard bleed valve?

thx

people say its stock so when u get owned on a race u can say its stock compaired to your etc etc..

yeah thats why my cars stock except for pod, zorst, rb26, supercharger, another zorst, 5 turbos, 10 stickers ... kekeke :cheers:

and to the guy with a quiet 5zigen exhaust?? are u sure its quiet?? or is it quiet compared to others LOL .. cause mine is quiet compared to others ... its jasma too... dont' know the brand ... but u can still hear it a mile away :(

just threw in a turbosmart bleed valve yesterday afternoon - was quite humid day so left it to midnight

until me and my mate went to tune in the psi

1st gear running on 10psi

while 2nd & 3rd gets 9-10 psi

4th goes to 9-10 psi but drops to 8 psi

yep ibleeded my bitch to 9-10 without any mods, YEP NO exhuast just K&N filter

performance? - yep 1st gears kicks in harder and i can feel the car pushing harder at high revs.

what are my chances up agaisnt a

stock gtst with 3" CAT back not boosted (7pis standard)

will i eat ihm alive or shall it be close?

gonna arrange a run with him this weekend ;o

wish me luck

and to the guy with a quiet 5zigen exhaust?? are u sure its quiet?? or is it quiet compared to others LOL .. cause mine is quiet compared to others ... its jasma too... dont' know the brand ... but u can still hear it a mile away  :D

yeh my one is pretty quiet man. Its louder than stock but not by much. You may be right tho. I have to get someone to give it a bit of a thrashing with me watching it from the side to hear what it sounds like.

With the windows down u can hear it droning in the background a little.

I also purchased a factory stock skyline. Standard exhaust, air box and everything else.

It's a good thing to do as I can notice huge differences with every mod I do.

I recently had a custom exhaust made and fitted with a BMW racing muffler to be a little different.

I noticed phenominal differences with the exhaust, new air pod.

mupkant i know what it feels like to buy a stock 33 and to be broke, just have a few quiet weekends and save for the full exhaust system its worth it! as QuickR33Melb said it makes a phenominal difference

QuickR33Melb if you have just added the zorst and pod I think you will find that you will need a new clutch soon cos that extra power and boost just munches the stock one (just found that out)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...