Jump to content
SAU Community

Recommended Posts

When people say 'stock', i think they are just emphasising the fact that no extra load has been put on the engine. ie. no boost controllers and cams adjustments and blah blah blah.

Exhaust should actually take a load off your engine (but in turn, it runs better so you give it more to compensate hehe)

When I had my R32 which had a stock exhaust system (but pod filter) I played with the boost. I tried to measure reasonably accurately the effects (0-100, some 400m runs etc) and the fastest it was happy at while keeping temps reasonable was about 0.8 bar so about 11psi. More boost actually started to go backwards. I stuffed up once and let it goto 1.1bar, it was slow as thou I didn't hear it detonate suprisingly.

As for my current R33, as per Rev210 ditch the two step its crap... or for a free mod just wire it so its always on asa temporary solution...

When I had my R32 which had a stock exhaust system (but pod filter) I played with the boost.  I tried to measure reasonably accurately the effects (0-100, some 400m runs etc) and the fastest it was happy at while keeping temps reasonable was about 0.8 bar so about 11psi.  More boost actually started to go backwards.  I stuffed up once and let it goto 1.1bar, it was slow as thou I didn't hear it detonate suprisingly.  

As for my current R33, as per Rev210 ditch the two step its crap... or for a free mod just wire it so its always on asa  temporary solution...

what do you mean by, "for a free mod just wire it so its always on asa temporary solution.." ?

as in just a standard bleed valve?

thx

people say its stock so when u get owned on a race u can say its stock compaired to your etc etc..

yeah thats why my cars stock except for pod, zorst, rb26, supercharger, another zorst, 5 turbos, 10 stickers ... kekeke :cheers:

and to the guy with a quiet 5zigen exhaust?? are u sure its quiet?? or is it quiet compared to others LOL .. cause mine is quiet compared to others ... its jasma too... dont' know the brand ... but u can still hear it a mile away :(

just threw in a turbosmart bleed valve yesterday afternoon - was quite humid day so left it to midnight

until me and my mate went to tune in the psi

1st gear running on 10psi

while 2nd & 3rd gets 9-10 psi

4th goes to 9-10 psi but drops to 8 psi

yep ibleeded my bitch to 9-10 without any mods, YEP NO exhuast just K&N filter

performance? - yep 1st gears kicks in harder and i can feel the car pushing harder at high revs.

what are my chances up agaisnt a

stock gtst with 3" CAT back not boosted (7pis standard)

will i eat ihm alive or shall it be close?

gonna arrange a run with him this weekend ;o

wish me luck

and to the guy with a quiet 5zigen exhaust?? are u sure its quiet?? or is it quiet compared to others LOL .. cause mine is quiet compared to others ... its jasma too... dont' know the brand ... but u can still hear it a mile away  :D

yeh my one is pretty quiet man. Its louder than stock but not by much. You may be right tho. I have to get someone to give it a bit of a thrashing with me watching it from the side to hear what it sounds like.

With the windows down u can hear it droning in the background a little.

I also purchased a factory stock skyline. Standard exhaust, air box and everything else.

It's a good thing to do as I can notice huge differences with every mod I do.

I recently had a custom exhaust made and fitted with a BMW racing muffler to be a little different.

I noticed phenominal differences with the exhaust, new air pod.

mupkant i know what it feels like to buy a stock 33 and to be broke, just have a few quiet weekends and save for the full exhaust system its worth it! as QuickR33Melb said it makes a phenominal difference

QuickR33Melb if you have just added the zorst and pod I think you will find that you will need a new clutch soon cos that extra power and boost just munches the stock one (just found that out)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
×
×
  • Create New...