Rb25det Auto - 4wd - Blocking Rear Hydro Line?

[sbyder]

I'm missing a lot of gear to make my Cedric a 4WD RB25DET. I've worked out that i need to remove the front driveshaft to make it RWD, but since i bought the engine in half cut format, the line out the back of the transfer case has been cut. Can i just block off the transfer case line in order to only have RWD?

I cannot run 4WD as im missing the actuators and the ECU and some other components which are specific to the cedric according to part number comparisons between the cedric and stagea.

Thanks for your help!

Ben

[sbyder]

So no one knows?

[fletch rb30]

yea, just take the line out of the back of the transfer case and remove the front drive shaft and half shafts

[sbyder]

Do i need to remove the front CV's, or can they stay in?

[sbyder]

Really need to work this out before i put the engine and tranny in the car next week.

Do the front half shafts/CV's need to be removed from the front diff, or will removing the front driveshaft suffice?

[fletch rb30]

Just the driveshaft will do the job.

It would be better to knock out the front half shafts and diff at the same time, but it wont matter if you dont.

[sbyder]

thanks. I agree, but hope to sell the car with the new owner having the ability to convert to 4WD with relative ease if he/she found the few parts needed.

Thanks again.

Ben

[shanilee]

Hi There!

This is Shanilee!

Im new in this site!

I hope I can have more friends here!

It would be better to knock out the front half shafts and diff at the same time, but it wont matter if you dont.

Thanks!

Have a nice day to all!

Good Luck!...

Car Sale Hub

Boston Used Cars

Edited October 20, 2009 by shanilee