Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

.82 rear, thats why its a bit laggy, but u got more topend out of it

since u cant check ya knock level reading just keep an eye on ya engine warning light, if it starts to come on regulary after a boosting hard step off and getnya tuner to check everything again (timing)

I am not really fussed, still picks up speed quick, boost hits like a train...which is rather interesting, first few times i did it, it was like when they hit the NOS in Fast & The Furious :) .

Since it is more laggy now, does that mean i am going to get better fuel economy when just dribbling around town?

Not so much at 160km/h but the revs at which point on this garph it hit 160km/h if you know what I'm saying.

yeah I was only using kph as a reference for the graph....load on the road could lean it out at any speed

As a rule of thumb 14:1 at idle, and depending on your timing and amount of brake on the rollers 12:1 is the leanest I'd ever go up top.....11.5:1 is a bit safer as long as everything else is taken into consideration.......we're talking pump fuel by the way.

I am not really fussed, still picks up speed quick, boost hits like a train...which is rather interesting, first few times i did it, it was like when they hit the NOS in Fast & The Furious :) .

Since it is more laggy now, does that mean i am going to get better fuel economy when just dribbling around town?

mate dont worry i no what its like to have a laggy turbo and thats on a forged eng. i have garrett gt3540 on mine

and like yours when boost hits it hits HARD!!!!!!!!

i love it

ahhahha my fuel economy is shit and thats rarely boosting it

I am not really fussed, still picks up speed quick, boost hits like a train...which is rather interesting, first few times i did it, it was like when they hit the NOS in Fast & The Furious :thumbsup: .

Crank up the boost to 18psi and feel the hit :)

buy decent quality straight off the bat. please. save for an extra week or 2 and buy cusco's or something.

It has been suggested on these very forums that the BC coilovers come out of the same plant as the Greddy coilovers. I'm not entirely sure whether it's true or not.... but either way the BC coilovers have springs that are too stiff for my liking!

I really do wonder, what exactly drives people to do this.

Also, why 49?

Doesnt help when your girlfriend posts what you've done over her Facebook status updates like Dan showed us!

i think krish is making similiar power to you abe. about the 250rwkw mark.

Yep making around 246.6 rwkw on 14.5psi....needing a new exhaust as when we cranked the boost up to 17psi at 400rpm it starting dropping off to 14psi and held hard on 14psi....for some stupid reason the boost wont go higher then 14psi so we ie me and the tuner came to the conclusion of needs a new cat back system and also have to get andrew from AM Performance to fit it all up as there is a leak out of the vband flange thingy

I am not really fussed, still picks up speed quick, boost hits like a train...which is rather interesting, first few times i did it, it was like when they hit the NOS in Fast & The Furious :)

Since it is more laggy now, does that mean i am going to get better fuel economy when just dribbling around town?

I am using a .63 rear housing so my boost comes on a bit earlier then yours Abe but has the same feeling of hitting you like a damn train when the boost kicks in.....well described with the FnF NOS scenario....cant wait to check it out tomorrow

mine is at boostworx right now, tuning the AEM FIC-8 ecu.

235kw at 5850rpm but not reving past 5850 at all - Im sure its a setting in the program,

I have made my suggestion re calibration to the tuners, so hopefully a little later I'll get the good news that all is fixed and well, reving thu to 7250rpm as per the remap chip.

the AEM FIC-8 looks great: here http://www.aempower.com/files/electronics/...lease080728.exe

for $350 off ebay its a massive score, considering the safc/sitc sold for $300 before they were even off the car! ;)

Hopefully my thoughts re the tune program setup work, and she free revs again into the red zone.

250kw

:)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I thought I'd heard rumor of someone that was developing a 6 speed kit to convert the 5 speed box. But maybe I was thinking of the PPG 6 speed sequential? That's about half the price of a car...  
    • I've searched fairly extensively among Japanese websites but found nothing really like those skirts in your photo. The closest I got was Origin Labo side skirts however they look more 'complete' in that they have a finishing piece or tab at the rear of the skirt so it blends into the bodywork, unlike the one in your pic. For that reason I'd say the skirts in your pic could be adapted from another car and they didn't include that tab piece, or those skirts aren't copied from an existing skirt but an original design. Sorry I can't help out in regard to ID'ing/sourcing them
    • Wonder if JB Weld sponsored the event lol
    • There's a big difference between a car built with millions of dollars in R&D, and someone like yourself taking a normal sporty road car, and making it 5 times more powerful. At the same time, get a modern sports car, and you can turn them up towards the 1000hp mark a lot easier too. Also, give that Lambo another 20 odd runs, and chances are it too may break something.
    • There isn’t really a cheap upgrade here. If someone made a decent, bolt in 6 speed that holds some grunt, it would do very well. The 5 speeds suck. You can put a - OSG 5 speed gear set into it. Ratios are tall so it zaps the “zing” out of it. Had one, busted it. - PPG 5 speed gear set synchro or dog’s. Ratios are even taller. - An overpriced Getrag. Nice to drive, expensive to source now. - A sequential of some sort. Expensive, very expensive. How many times do you pop a 5 speed before you throw the toys out of the cot?  
×
×
  • Create New...