Jump to content
SAU Community

Recommended Posts

ruby do u want dales seat? if not ill take it!

Yeah I do mate ... just a matter of meeting up with him. Gotta get the Stagea to the EHP show after work today, then a handful of appointments over the weekend to work around.

Why? You going to hold my welder to ransom? ;)

:/

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

The difference is going from the standard RB20/25 over the top intake manifold to a front facing manifold then there would be gains to be had, but Luke's manifold is a GTR manifold and there are plenty for GTR's making up to insane amounts of power still using the factory GTR manifold.

The Greddy and hypertune manifolds will give you slight increases in the top end when you are making massive amounts of power but you will be getting this gain at the cost of low down and midrange power, and like SLED said your only talking 20-30HP gains on a 700HP engine but your are losing like 80HP below 5000rpm

x2 :/

yeah i mean Turbotech :/

my current boost curve drops off a fair bit, from 10psi down to around 7 by redline. holding the boost higher through the revs with the new boost tee will obviously affect my tune wont it?

might do Damo - you had it all retuned very recently didnt you? give tuner a buzz for sure

The main reason I'm keeping the stock plenum is cause of it's legal and I'm short of the cash, also read they can hold over 400. Once I build the 30 with the race head i may go something more crazy

well i found out my exhaust manifold leak from the track day was due to only 1 bolt holding the turbo on!!!

coz the manifold doesnt have the locking tabs on it for the bolts they must have come loose.. LOL

but coz its a f**king ca its hard to get to the bolts!! ahhhh cut nuckles!

yeah i mean Turbotech :blush:

my current boost curve drops off a fair bit, from 10psi down to around 7 by redline. holding the boost higher through the revs with the new boost tee will obviously affect my tune wont it?

mines starting to spike out to 1.2 bar, but im thinking that has a lot to do with my hks inlet snorkel.

hey guys, first of all, farkinn brilliant weather eh?

perfect for my durable ranger skin!

need a favour, can any one pick up amy rb20 from ingle farm, and drop it off in ingle farm tomorrow arvo sometime?

will pay petty $$

hey guys, anyone who can help me with getting an apprenticeship as an electrician or at least point me in the right direction will be a big help

PM me your age, details and experience (if any) - can't promise anything but can at least give you some advice, Peer training is prob the way to go.

She looks nice any which way, but yes, preferably without clothes

She'd look better in my bedsheets!

:happy:

... actually, she'd look better with another woman on her ... preferrably Charlize Theron. :drool:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
×
×
  • Create New...