Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

no you wont. you wont even do silly, silly things to girls that are gagging for it.

all you have to do is flop it out.

in other news , rear main seal is fine! woot

chucked it up on the hoist at my mates work today and it was the oil drain hose that had a small hole in it , put some gasket sealer on it and its all sweet for now , when i get more cash ill get

a new hose and fit it when i do oil change next :)

Yep, called up asking about is it ok cause i cant find a second hand one and he's like yeah there fine aslong as it has some writing saying its for fuel its fine.

So i might get a Sard one and put a little note on it and away i go.

LOL! i have many parts on the 31 club for sale, most have been sold cheap ha just to get rid

of it, like standard rb20 turbs+ dump for 50 bucks, coz thats how i roll....

i also have the 2,5'' cat back on there for 50 bucks, some doosch just offered me 20 bucks haha

c'mon, fifty is already cheap.. where do some people get the nerve?

welcome to the R31 Lowball Club Craig LOL

Yep, called up asking about is it ok cause i cant find a second hand one and he's like yeah there fine aslong as it has some writing saying its for fuel its fine.

So i might get a Sard one and put a little note on it and away i go.

Your problem is going to be the FPR. An aftermarket rail isn't going to fit the factory FPR, but if you have an aftermarket FPR then they will crack the shits because you can adjust your AFR's by playing with the fuel pressure.

Edited by D_Stirls
Your problem is going to be the FPR. An aftermarket rail isn't going to fit the factor FPR, but if you have an aftermarket FPR then they will crack the shits because you can adjust your AFR's by playing with the fuel pressure.

My thoughts exactly

God damm, one problem leads to another lol thanks Dale. :)

Also Luke, Rory Thompson can engineer your cf bonnet for roughly $250, as i was speaking to a R34 GTR owner on sunday saying Rory engineered his Z-tune one no problems.

God damm, one problem leads to another lol thanks Dale. :)

Also Luke, Rory Thompson can engineer your cf bonnet for roughly $250, as i was speaking to a R34 GTR owner on sunday saying Rory engineered his Z-tune one no problems.

Very interesting Luke, cheers for that, I'll have to call him but it may not be possible. I think it needs an aluminum frame to be engineered but I will call just to see anyways :blush:

FINALLY picked up my new turbo after calling speedlab jeff for nearly 2 weeks...

ended up just going to JPI and givin them the cash, even had to take it off the rb20 myself :happy: (on works time hehe)

Image007-1.jpg

Very interesting Luke, cheers for that, I'll have to call him but it may not be possible. I think it needs an aluminum frame to be engineered but I will call just to see anyways :happy:

This one had no alloy frame and was brought from cartoys for $700. Also got his Greddy coilovers done and all his Cusco suspension arms. The coils didnt have to be welded up either.

God damm, one problem leads to another lol thanks Dale. :happy:

Also Luke, the amount of gain you would get out of an aftermarket fuel rail would be nigh on zip for the amount you'd pay for it.

Not to menion that shiny rails draw too much unwarranted attention which is the last thing you'd need.

There are so many other things that your $$$ would better benefit your car, ie. decent delivery and return lines etc.

Also Luke, the amount of gain you would get out of an aftermarket fuel rail would be nigh on zip for the amount you'd pay for it.

Not to menion that shiny rails draw too much unwarranted attention which is the last thing you'd need.

There are so many other things that your $$ would better benefit your car, ie. decent delivery and return lines etc.

qft

This one had no alloy frame and was brought from cartoys for $700. Also got his Greddy coilovers done and all his Cusco suspension arms. The coils didnt have to be welded up either.

2JZ no shit?

I will have to make a call to Rory and see what the story is. Anyone have his number?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...