Jump to content
SAU Community

Recommended Posts

Nah got the pump priming. Doesn't even come close to firing up though, just turns over for a bit while draining the shit out of the battery, even when being jumped and the other car is revving a fair bit, it still almost dies completely.

My mate said he could hear the fuel being pumped into the rail, so it might be a spark issue, but I really don't give a fuck anymore. It's time for someone who knows what they're doing re wiring to have a suss (that or it's time to push the cunt over a cliff and gleefully watch the destruction that ensues)

Edited by AndrewJZX100
  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

Brand new plates too Mitch :D

o noez haha

Yo Donkey Kong, you should buy my KTS Tie Rod ends - increase steering lock = fully sick hectik driftz :)

sorry peach , if im gonna buy anything for lock it will be drift knuckles

Can you check for spark? Remove one of the coil packs and stick in a spark plug ... crank it over and check for spark? Or timing light if you have one.

:)

I just can't stand to look at the thing at the moment. My mates dad has a multi-meter but none of us who are working on it have a clue about wiring so I guess we've done pretty well to get this far with all the bullshit little differences/problems we've encountered :D

One thing though, Nissan can suck a huge wang. Why the hell would you make every single goddam sensor have a different plug between 2 engines of the same vintage fitted to similar chassis?

UUUGGGHHHH marry me Andrew??

im right there with ya mate, couldnt even get the RB on the engine mounts today,

and Dale needed the crane back ASAP, si i dropped it onto one mount just so its in there

ill take it to a shop and let some other douche deal with it.

between work, My Boy and other duties, i no longer have the time of patience anymore.

FCKING CARS!!!!

gonna do the worlds biggest skid when its done i swear!

UUUGGGHHHH marry me Andrew??

im right there with ya mate, couldnt even get the RB on the engine mounts today,

and Dale needed the crane back ASAP, si i dropped it onto one mount just so its in there

ill take it to a shop and let some other douche deal with it.

between work, My Boy and other duties, i no longer have the time of patience anymore.

FCKING CARS!!!!

gonna do the worlds biggest skid when its done i swear!

LOL we've both come to the same conclusion - some other sucka can deal with it :D

Tandem skids when both our shitboxes are done fo sho.

It wouldn't be so bad if the end result was some bullshit tough motor, but all this shit for a 20? :D

Nah in all honesty mine wouldn'tve been half the headfuck it has if me and my mate didn't make an important decision re how to swap looms while absolutely plastered last weekend :) that was where the real troubles began.

It wouldn't be so bad if the end result was some bullshit tough motor, but all this shit for a 20? :D

Nah in all honesty mine wouldn'tve been half the headf**k it has if me and my mate didn't make an important decision re how to swap looms while absolutely plastered last weekend :) that was where the real troubles began.

try doin it for 8 months for a stock motor haha

Well I think my GTR has proven a new meaning to the term "GTR handle like they're on rails"

Aye thats well low.... what suspension u running? :P

I just got back from a 2 hour drive thru the adelaide hills, from hahndorf to lobethal and gumeracha as well as a few detours here and there, loads of great twisties, some nice sweeping bends and the odd straight road make for a great time. even got to drive on a single lane dirt road with a huge dropoff on one side... gtr lapped it up and asked for seconds

*sigh* so have to do that next weekend

-D

Wonderful! Pulled my RS250 race bike engine down and found some foreign metal in there. :P Appears some douche at the track didn't like a little 250 spanking him and his 1000 and put foreign bits (a piston pin not even for my RS) into my crank case when I left it unattended ... resulting in the clutch basket gear, gearbox engagement gear, and seals being wrecked. Now its rebuild time ... and I haven't started the season! :D

Might have found a race spec motor in Singapore ... waiting for confirmation.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...