Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

1 plug from a cheap set of chinese iridium sparkies didnt work

new champions in, started but runs like crap.

cheers. I thought it wasnt meant to start. :down:

yeah i put my 575cc's in my gtr with a stock ecu, ran extremely rich till we lowered the fuel rail pressure (even then it ran poorly), and once we put nistune in we were able to get the K constant entered and tune it properly

nistune ftw

-D

550cc siemens I paid $360

here :http://cgi.ebay.com/ebaymotors/550c-FUEL-INJECTORS-NISSAN-SKYLINE-RB26DETT-RB26-GT-R-R_W0QQcmdZViewItemQQhashZitem414d151c67QQitemZ280466103399QQptZMotorsQ5fCarQ5fTr

uckQ5fPartsQ5fAccessories

how much are Siemens 700cc Ben

given the current shitty exchange rate (0.89c vs the 0.98c when chad and I got our sets), just over $600 for a set of 6 side feed injectors 700cc (assuming its for ur rb25). i dont get mine from ebay, i source them direct from miami so I can take advantage of the 1 year warranty. Side feed injectors are strangely more expensive than top feed injectors, gtr 700cc injectors can be got for $550 given the current exchange rate.

if you can wait till the dollar gets better you can save a bit of cash, otherwise I can get them in after 2 weeks shipping time.

Injector brands are either Siemens-Deka, Bosch or Lucas, whichever meets the specifications requested.

-D

yeah for RB25 thanks Ben

in no rush just wanted a ball park figure of what to save for

if our dollar goes up, you can expect to pay around the $500 mark rather than $600 odd... let me know when u want em and ill calculate the cost (if you watch the exchange rate, you'll want something in the upper 90cent range for a decent buy

your other option is to get top feed injectors and get a rail conversion kit

-D

*******Continued from the Spotted Thread.******

What is wrong with the Xtreme Clutches? I know your reason Dion, but why Exedy over Xtreme?

My tuner suggests Xtreme Heavy Duty Kit, ISC suggests Xtreme Motorsport Kit - Driven a mates R32GTR with this clutch and wasn't too keen, he isn't too keen on it either for a daily. Then speaking to Jim, he suggests neither....ahhhh, too many choices.

Surprising how many phone calls i got today from people i haven't spoken to in ages, all asking if i was at G1 so we could catch up, was at work however :down:

A few people on this forum have driven my car, and every one of them have commented on how it has a nice pedal - I totally agree. But, if I'm: a) doing a fast hills drive or b) stuck in traffic, it dicks around.

Abe, I am pretty sure Extreme and Exedy are the same thing - the $2,500 twin plate clutch I bought from Brenton at Adelaide Clutch for my S15 had BOTH brands written on the box.

Buy a heavily clamped (like 1,100kg - and you will need it with your power level) organic single plate clutch and you will be set. It will only last 40,000-50,000km, but they are relatively cheap ($1,000ish) and are pleasant to drive with. And if you find the pedal feel too heavy for you, you can modify the spring setup at the top of your clutch pedal assembly to make it more to your liking.

DO NOT under any circumstances get a twin or triple plate - they are almost always absolute cops to drive, and you will end up hating your car - I certainly did with the S15 - biggest mistake I ever made and I blew the twin plate in under 15,000km (did include many drag days though). I know some people have had joy with twin plates, but for 99.9% street driving and for any sort of daily driving forget it.

Abe, I am pretty sure Extreme and Exedy are the same thing - the $2,500 twin plate clutch I bought from Brenton at Adelaide Clutch for my S15 had BOTH brands written on the box.

Buy a heavily clamped (like 1,100kg - and you will need it with your power level) organic single plate clutch and you will be set. It will only last 40,000-50,000km, but they are relatively cheap ($1,000ish) and are pleasant to drive with. And if you find the pedal feel too heavy for you, you can modify the spring setup at the top of your clutch pedal assembly to make it more to your liking.

DO NOT under any circumstances get a twin or triple plate - they are almost always absolute cops to drive, and you will end up hating your car - I certainly did with the S15 - biggest mistake I ever made and I blew the twin plate in under 15,000km (did include many drag days though). I know some people have had joy with twin plates, but for 99.9% street driving and for any sort of daily driving forget it.

Depends Andrew, spend big dollars on a decent Nismo twinny and she'll drive like standard. But no, Xtreme and Exedy aren't the same

Wouldn't mind a Nismo Single Coppermix.

I've got the Super Coppermix twin in mine. It used to have a standard clutch, with the Nismo one put in, I didn't even notice the clutch had changed. Drivability is incredible

I installed a Extreme cushioned button on a mates car not long ago, drives like standard, holds 350 + rwkw, took out a exedy cushioned button that melted! and was bloody heavy under foot too.

Extreme have got there skylines kits well sorted these days, would recommend no problem at all.

Depends Andrew, spend big dollars on a decent Nismo twinny and she'll drive like standard. But no, Xtreme and Exedy aren't the same

+1

the nismo twin is what i'll get once my current one dies

i'll grab the nismo master cylinder at the same time too tho

-D

Alot of incorrect info flying around in here.

The whole idea of going for a twin plate is to avoid a heavy pedal....which is what a single with a thicker diaphram will give you.

I'm not even a fan of the singles with solid centres that are running buttons because they are very unforgiving on you and your driveline......these don't affect pedal pressure though.

Triple plate is a total waste of time for your car Abe.....not to mention that you will always be trying to release 3 plates before you can change years...not very good for lightening shifts.

Nismo have probably done more testing on GTR's than anyone else in the clutch department and have come up with 2 versions of the Twin Copper Mix one has a slightly heavier diaphram than the other, hence slightly heavier pedal but more clamping pressure.

I ran the lightest of the 2 Twin Copper Mix kits and found the pedal to be lighter than the factory single because they rely on surface area (being twice as much) and not clamping pressure which gives the heavy pedal. The use of organic material is for forgiveness on your driveline (ability to slip it in traffic) but with a mix of copper to increase grip and reduce fade on the track.

IMHO, either of the 2 Nismo twin setups give you flexibilty between street and track which would suit your specific requirements Abe.

Having said that, a car that's used mainly for track like Andrew's (Blue 32) would not benefit from this set up as he would want very little slip and lightening changes.....plus he doesn't idle in traffic so clamping pressue is not a problem in this instance.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...