Jump to content
SAU Community

Recommended Posts

i still havent herd anything from the job i went for and its been almost 2 weeks would it be wrong to send an email asking how much longer i have to wait?

I applied for about 30 jobs. and only heard back from 4.

got a job where i didn't apply. lol.

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

On picket range rd mclaren vale today there was a burnt out 350z.

Looked to have had an exhaust system, sub/s and some rims which were melted.

There was nothing left of it at all could hardly tell what it was. Poor bastered who lost it!

Had a chat to one of Weezy's mates today at a tyre shop, forgot the guys name but he was driving a sweet as dark black/grey colour 33GTR then leaving the tyre shop a guy in a red HR31 let me into the traffic, pretty sure it was running Dave's old meshies.

Fk should haveread SAU before I went out lol.

Ended up there, such a packed night. Most packed I've seen HQ in months! Place was rocking. I didn't want to leave haha but they pulled the plug at 6am. Ended up heading back to Frosty's apartment (trance DJ for all you fans playing at home).

Epic long weekend.

yeah, ya shoulda. was an epic night. would have stayed until close, but i had to get up and do brekky with jack miller, so pulled the plug about 1:30 - 2am and went and powernapped. was waiting with my friend in the line to get back in and a dozen dudes and a mouthy chick got chucked out...........and a fight spilled onto west tce. epic lols

thats wicked Daniel.....i was chilling out with DJ 2J and Brett James....from memory.....cant remember much of it lol

you were there and you didnt let me know? rude f**k LOL

I applied for about 30 jobs. and only heard back from 4.

got a job where i didn't apply. lol.

thats pretty much how it go's, i applied for like 400 before i got my first job. now i get phone calls randomly every 3months and sms's from job agencies living in the hope im still looking for work.

www.careerone.com.au

ps, anyone wanna drive the 200 for a bit for me tomorrow? my driver cancelled, lol. need someone about 9ish.

Edited by scandyflick

Just got back from Melbourne. Left Adelaide at 4:10Pm yesturday arrived in melb at 5:30ish melb time. Picked up a 280rwkw supra with a mate and drove it back.

First road trip. Wasn't to bad :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...