Jump to content
SAU Community

Recommended Posts

I deleted mine a few weeks ago; It's a time-waster with lax security/privacy settings...

Hrmmmm .. $150 seems cheap; I got a nistune put in my ECU months ago from the groupbuy, still haven't had it tuned. Anything to get a bit more power and fuel economy would be awesome... especially at that sorta money...

I know, $150s cheaper than I would have expected, but then again if it only takes them an hour or maybe two, then thats pretty much spot on...

I'm getting some nismo AFMs put in tomorrow and a retune - if we can't get it sorted then I may take the car to boostworx just for the tune, we'll see what happens

-D

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

i need a job before 2nd of June

but everything i apply for i get knocked back

does ANYONE know of ANY job i would have a chance of getting???

NEED one before 2nd June

Didn't you get a job at Maccas?

so im in the market for a new clutch, im leaning toword the NPC HD 5 puk that steve can get,

is there sny other suggestions before i place the order?

keeping in mind what its gonna be used in.

K-GO!

Yep, go the NPC, seems a pretty good clutch all round, especially for the price and better than that shit Extreme(ly crap) puts out

I deleted mine a few weeks ago; It's a time-waster with lax security/privacy settings...

Hrmmmm .. $150 seems cheap; I got a nistune put in my ECU months ago from the groupbuy, still haven't had it tuned. Anything to get a bit more power and fuel economy would be awesome... especially at that sorta money...

I know, $150s cheaper than I would have expected, but then again if it only takes them an hour or maybe two, then thats pretty much spot on...

I'm getting some nismo AFMs put in tomorrow and a retune - if we can't get it sorted then I may take the car to boostworx just for the tune, we'll see what happens

-D

i remap will only be done after a full tune

remap = touch up tune full tune will cost you about $450 @ boostworx JRM to i think don't quote me i can ask on friday for people $600 with Martin Donnon less club member discount

i remap will only be done after a full tune

remap = touch up tune full tune will cost you about $450 @ boostworx JRM to i think don't quote me i can ask on friday for people $600 with Martin Donnon less club member discount

Pretty sure Martin charges $500 Steve, $450 for SAU:SA members IIRC

Errr air/fuel ratio on my SAFCII? Like he did on my R34 and got 20 more rwkw out of it.

Haven't got it fitted yet though to the 35 (haven't had time to get out my soldering iron).

i remap will only be done after a full tune

remap = touch up tune full tune will cost you about $450 @ boostworx JRM to i think don't quote me i can ask on friday for people $600 with Martin Donnon less club member discount

I'll call boostworx tomorrow to confirm this price. I have access to a RWD dyno so I may very well play around with the tune myself - that said boostworx have a track record with skylines and are literally in walking distance from my mechanic so I'm keen on giving them a shot if I get stuck...

I like places that do conservative tunes

-D

whats wrong with a knock tune!!! :devil:

heh, nothing if u made ur engine to tolerate that stuff but me, i got a daily... i dont need a tune that hardcore - would rather go 10kw less to make sure it doesnt knock even in the worst circumstances

-D

EDIT - Just had some fun at home. One of my brothers snakes got out of its enclosure (one out of a dozen) and I was in the room looking for a box of pizza shapes and I turn around and theres this python just looking at me... dude was a little lower than my head but we were looking at each other, and he was having a good sniff... and I think the both of us were thinking "Oh hey, what the f**k..." looked like one of the smaller snakes he had cause its head was really thin, but decided against trying to wrangle it myself - got my bro and he pulled the wires out and extracted a 2.5 mt green python from the back of the couch....

yeah... im glad I erred on expert help - they might not be venomous but their bites still hurt

-D

Any idea on what would be causing my rb20 not to rev past 4500rpm?

It virtually hits an invisible brick wall...

*no brick wall jokes.

:devil:

Do you have a PowerFC Jake? My brother-in-law has just had this exact issue (plus intermittent spark plug reporting issues on his MFD) in his R33GTR and turns out the PowerFC was knackered.

Do you have a PowerFC Jake? My brother-in-law has just had this exact issue (plus intermittent spark plug reporting issues on his MFD) in his R33GTR and turns out the PowerFC was knackered.

Writeoff had a buggered powerfc. IIRC he sent it back to nengun who said there was nothing wrong with it... and then promptly sent it back :devil:

-D

David now has in his GTR the PowerFC out of the R32GTR that was written off in Targa Tasmania the other week. All works perfectly now.

He is getting the final tune done on his brand new VSpec Nur engine next week with the HKS 2530s. Can't wait to see what number he makes, but I expect it to be a little bit over 300rwkw. Not bad for a daily.

David now has in his GTR the PowerFC out of the R32GTR that was written off in Targa Tasmania the other week. All works perfectly now.

He is getting the final tune done on his brand new VSpec Nur engine next week with the HKS 2530s. Can't wait to see what number he makes, but I expect it to be a little bit over 300rwkw. Not bad for a daily.

lol is that the r32 that flipped a couple times nose-tail and they bent just about everything on the car?

wicked crash that

300-340kw would be what I'm aiming for with the turbo/manifold upgrade...

-D

Negative on the Power FC, Andrew.

I don't understand.

Im fairly sure my #6 coilpacks is stuffed, hence why im changing coilpacks. Once the engine gets warm..after 10 minutes, it breaks into 5 cylinders, and make's WRX owners envious of my engine.

However, tonight, i did not have an issue at all..drove for about 40 minutes, except for this problem of it limiting itself to 4500rpm.

I'm going to have to assume it has something to do with the coilpacks, as the problem has just 'magically' disappeared, but this new problem has come about.

AFM wouldnt be knackered, it would be obvious there was earlier im the rev range i would think?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...