Jump to content
SAU Community

Recommended Posts

EDIT: About those Rota Wheels......me likey these very much......wonder what would look good on a silver car?

Silver, Bronze or Gunmetal?..........maybe the latter???

DPT AKA CE28N

18 x 9.5, 5 x 114.3 +22 Hyper Silver

18 x 9.5, 5 x 114.3 +22 Matt Bronze

18 x 9.5, 5 x 114.3 +22 Gun metal

That would be my choice if I were in the market for wheels. Silver what though?

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

Ive got myself a $10,000 piece of paper (diploma) in this audio shit...to me, it sounds doctored...theres way to much clarity in her voice. His is muffled and unclear, which i think has been done post recording as its not him (just an impersonator) to make it seem more real...

It was recorded from her end, if she had the phone on loudspeaker, then recorded, I would say that you'd get the same results as the leaked audio. Prove me wrong, I'm no expert, that's just how I see it

everything seems pretty easy to work on in 32's (apart from the things in the engine bay that require size 1 Japanese hands like the f**king tensioning bolt on the powersteering pump).

that being said, if i had un-necessary $$ i would spend it on other ppl doing the work..... at least there is someone to blame if it goes wrong then :woot:

Vision R in Perth sell a range of Rota Wheels for $999 + $100 delivery, so $1099 delivered, a $550 saving over the link Penny posted:

http://www.evolutionoz.net/forums/index.php?showtopic=50661

which include:

That is quite insane .... even if it equates to $1,200 delivered with nuts when I paid $1,600 delivered with nuts direct from Rota. They must be making a loss on them surely. At least they aren't selling MY style wheels at that price, but I am keen on a pair of 10" +12 for the rears of my car to fatten up the stance - wish I could find a pair for $600 delivered!

Pete (SLED) found these if your interested

http://page6.auctions.yahoo.co.jp/jp/auction/f86976380

18x10 +21 all round :woot:

Ends in 8 hours.

And Helso....

http://page4.auctions.yahoo.co.jp/jp/auction/d106451542

Edited by Luke_ENR34
anyone have stockies with legal tread ?

NEED ASAP !!!!!!!!!!!!

I cheked mine today the just look legal but the rears have had skids on them. Your welcome to have a look if you have no luck

i worked out i can get 3 for that price.

Just going some figures..

bumper..$1000 max, assuming its ready for paint.

primer + labour, an hour.. ($100p/h maybe?)

= $1100,

paint in white, then clear coat.. 2 hours?

$400?

= $1500

fitting of bumper..30 minutes?

= $1550

so where the feck is this $3000 coming from? Even if they charged 400 an hour..it wouldnt be close. argh.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...